Wired over-ear headphones Solid American black walnut shells 60 mm dynamic driver Nanowood fibre composite diaphragm W-shaped suspension seal Closed-back design U-shaped acoustic damping tube Conical baffle plate 32 Ω high sensitivity design 3.5 mm and 4.4 mm headphone cables included High-quality headphone storage bag Sound of nature The FIIO FT1 cups are made from carefully selected American black walnut in FAS quality. The smooth grain of the wood, which is unique to each piece, and the fine texture bring out its natural beauty. This very dense solid wood also helps to effectively reduce cavity resonances and minimise standing waves. 60 mm dynamic driver The FIIO FT1 features a newly developed 60 mm second-generation dynamic driver specifically designed for FIIO's first closed-back over-ear headphones. The larger-than-average driver improves the efficiency of energy conversion and provides a solid foundation for powerful bass. In addition, the larger size of the driver results in lower resonance points at low frequencies, allowing for deeper bass, dynamic sound and an overall authoritative sound. Nanofibre composite cone - paper making technology and the art of sound The cone of the FIIO FT1 is mainly made of carefully selected paper wood fibres based on 90 year old spruce wood from Northern Europe. European spruce is a premium raw material for musical instruments and fibre products, known for its clear and natural sound. Mature northern European spruce wood undergoes a series of processes including soaking, boiling and beating to produce a specific pulp. A certain amount of carbon fibre material is added to meet the acoustic resilience requirements. The membrane is then baked and moulded in a further round so that it finally reaches a thickness of around 0.1 mm, is light and resistant. To bring out the full acoustic performance of the nano wood fibres, a lightweight PU material with high internal resistance is used for the suspension seal, which improves the compliance of the diaphragm and increases elasticity in the low frequency range, enhancing the density of voices from the sound source, resulting in warm, rich voices. In keeping with its overall acoustic concept and high-quality listening experience, the FIIO FT1 uses a nano wood fibre cone. This membrane consists of carefully selected paper fibres in combination with a lightweight PU (polyurethane) suspension seal. It is characterised by excellent high-frequency extension and excellent transient response, resulting in a clean, precise sound with clear imaging and giving you the unique sweet, rich and dense midrange sound of paper cones. This driver works in harmony with the FT1's other acoustic design elements to deliver a specially tuned frequency response for a pure and pleasing sound experience. It's as if the elegant aesthetics of the ‘paper’ driver translate perfectly into beautiful sound. Cutting-edge technology and innovative applications The FIIO FT1, FIIO's first closed-back over-ear headphones, pioneers a new generation of in-house acoustic technology - the W-shaped suspension seal. The 25 mm diameter voice coil is larger compared to similar models and has been specially optimised and tuned. Compared to typical, similarly sized cones, the W-shaped cone achieves a 25.8 % larger effective vibrating area, allowing it to store more energy reserves. The FT1's cone with a hard dome and a compliant suspension seal allows the 25 mm voice coil to drive the stiffer dome region directly. This design minimises vibration losses between the different materials and reduces distortion caused by driver break-up, allowing the FT1 to deliver a more refined sound. Ultra-fine Japanese CCAW voice coil To ensure a robust and high-quality sound, the FIIO FT1 uses a specially imported Japanese ultra-fine CCAW (Copper-Clad Aluminium Wire) voice coil with a diameter of up to 25 mm. A longer copper wire of the voice coil can directly improve the efficiency of the transducer and the drive capacity, resulting in a better transient response and a purer, more pleasant sound. Each individual wire core in the CCAW coil has a diameter of approx. 0.035 mm and is therefore as thin as a hair. In addition, the voice coil frame of the FT1 is made of lightweight KSV (Kapton), which also contributes to a significant reduction in overall cone mass. The result is improved response speed and minimised reverberation. Closed-back design The FT1 is FIIO's first closed-back over-ear headphones and incorporates a number of features specifically designed to enhance the closed-back listening experience. A series of sound-absorbing components in the FT1 effectively reduce ambient noise, including external voices and ambient noise, by up to 26 dB. Whether you're commuting, editing recordings, working in the office or gaming, the FT1 lets you immerse yourself in a high-fidelity audio world. It is a truly great sounding all-rounder headphone. U-shaped sound attenuation tube for improved noise reduction The U-shaped sound attenuation tube specially developed for the FIIO FT1 not only improves passive noise reduction, but also ensures that sound energy is channelled through the flute over a certain length and angle, increasing the air viscosity and reducing the resonance frequency of the cavity. This further improves the bass expansion. You will clearly feel the air movement and the focussed power of percussion and strings. Conical baffle The pursuit of excellent sound has always been the essence of hi-fi. Based on the characteristics of the FT1 dynamic drivers, the development team has designed a conical baffle for them. This device allows the entire driver to be positioned parallel to the human ear, breaking sound convergence and avoiding standing waves. The result is minimal attenuation of high frequencies for true hi-fi sound quality. 32-Ω design with high sensitivity The FIIO FT1 is designed to provide users with a high-quality hi-fi experience in various usage scenarios. To achieve this, the FT1 has a low impedance of 32Ω and offers an acoustic sensitivity of 113dB/Vrms@1kHz (equivalent to 98dB/mW@1kHz). This significantly reduces the need for drive power, allowing you to enjoy outstanding sound quality effortlessly. Adaptive 3-axis headband The FT1 has inherited the excellent ergonomic design of the FIIO FT series. The adaptive 3-axis headband allows free rotation at different angles. This design adapts to different head sizes and ensures a snug fit on the head for improved comfort and minimised sound loss. 10Hz-40kHz ultra-wide frequency response The FIIO FT1 has a frequency response of 10 Hz to 40 kHz, providing a studio-like listening experience. Every little detail is reproduced cleanly, just as you would expect from a professional audio device. Lightweight, portable headband To make the FT1 headband more portable and lighter, it is equipped with high-quality steel rails that significantly increase the durability of the headband. You will feel the precision and sophistication of the mechanical construction every time you adjust the headband. In addition, compared to similar products, the FT1 offers an extended adjustment range from 0 to 11 clicks to adapt to different head sizes. The part of the headband that comes into contact with the head is made of lychee leather for a soft and comfortable feel. Breathable fabric ear pads Experience comfortable long listening sessions and say goodbye to congestion. The FT1 is equipped with breathable fabric ear pads, which are made of a textile material that comes into contact with your skin. The high-density, breathable mesh design efficiently dissipates the heat that builds up between the ear pads and your ears. The side of the ear pads is made of protein leather, which not only looks good, but feels good too. Dual TRS headphone jacks The FIIO FT1 features two 3.5mm TRS headphone jacks, allowing you to easily switch and upgrade to a different headphone cable. Includes high-quality headphone storage bag The FT1 comes with a high-quality headphone storage bag, made with the same materials and techniques used by top French brands. It offers a refined and elegant look rarely found in this class, but undoubtedly useful for protection. 2 silver-plated oxygen-free copper cables included The brand new FT1 comes with two headphone cables - with 3.5 mm plugs (single-ended) and 4.4 mm plugs (balanced). Both cables are identical and consist of an oxygen-free, copper-coated silver wire base with 392 wires, have a thickness of 24AWG and are 1.5 metres long. This makes the FT1 compatible with many audio devices as you can easily switch between cables. They produce a transparent yet robust sound, so you can enjoy lossless audio quality to the full. What`s in the boxFiiO FT1 32Ω Large Dynamic Driver headphones with solid wood cups 392-core silver-plated oxygen-free copper cable 3.5 mm headphone cable 4.4 mm balanced headphone cable 3.5 mm to 6.35 mm adapter High-quality headphone storage bag

Open back planar headphones Open flat diaphragm design Large Planar Magnetic driver (95mm x 86mm)High fidelity sound Interchangeable 3.5mm/4.4mm plugs The Fiio FT1 Pro is an advanced open flat diaphragm headphone equipped with a specially developed 95x86mm flat diaphragm unit. Featuring a 1µm special film diaphragm, double sapphire aluminium coating and a balanced open acoustic design, the FT1 Pro offers a wide frequency response from 7Hz to 40kHz. With its lightweight and breathable construction, it is designed for comfort and exceptional sound quality. Self-developed planar driver 95x86 mm driver for a wide sound stage and precise sound reproduction. 1 µm special film diaphragm The ultra-thin diaphragm enables fast response and detailed high frequency reproduction. Double sapphire aluminium coating Improves sound clarity and frequency response with a unique sound. Uniform magnetic field design Ensures even magnetic distribution and reduces distortion for refined sound quality. 28nm chip-level process technology The semiconductor process improves the durability and performance of the diaphragms. 3-axis adaptive wearing design Adapts comfortably to different head shapes thanks to the adjustable headband.Breathable ear pads Designed for long listening sessions with heat dissipation and comfort. Interchangeable audio plug Includes both 3.5 mm and 4.4 mm connectors for flexible useThe Fiio FT1 Pro is designed for audiophiles who want the ultimate open-back flat diaphragm experience. With innovative technologies such as 28nm chip-level diaphragm manufacturing, uniform magnetic field design and sapphire aluminium coating, the FT1 Pro delivers a dynamic and immersive listening experience. The adaptable design ensures comfort during long sessions and makes it a versatile choice for high-fidelity sound on the go.

Closed-back headphones Natural purpleheart wood Large dynamic 60 mm driver Diaphragm made of wool composite nanofiber wood W-shaped diaphragm Closed design U-shaped damping tube Low impedance, high sensitivity, easy to drive Furukawa monocrystal copper + silver-plated, oxygen-free copper braided cable Lambskin/suede ear padssuede included 4 detachable audio plugs included Yaoli linen storage bag Naturally magical colors, gracefully enchanting purple The creation of the FT13's wooden ear cups Following the success of our FT1 wooden headphones, FiiO began searching for new types of wood to bring their unique appeal to more people. This time, FiiOs search led them to a “purple treasure” from the ancient rainforests of South America: purpleheart wood. This wood is not only exceptionally hard, but also captivates with its unique color. Over time, its light brown hue gradually transforms into an unforgettable, deep purple. Creating the vibrant wooden ear cups requires a blend of nature's magic and FiiO's meticulous craftsmanship. Purpleheart has been used for instruments, furniture, and other items since the 1920s. After a long journey from South America, the wood arrives in Lianyungang, Jiangsu, where it is stabilized in a hot oven and cut with precision. It is then stored for months in a dark room, where it slowly “develops” its fascinating wine-red color. This wood then undergoes a final, intensive process of selection, cutting, CNC carving, polishing, and varnishing before it is ready for the final product. Due to its rarity in nature, purple has long been considered a symbol of mystery, power, and individuality—with deep cultural significance. It is precisely this color, which ages beautifully over time, that is our inspiration. It allows us to perfectly express the original intention of our wooden headphone series—to blend into the natural world and age elegantly over time. Ear cups made from natural purpleheart wood Natural colors, solid and hard The headphone ear cups are made from purpleheart wood, a type of wood native to South America. To achieve its rich color, each piece of wood is left to age naturally for 90 days. Due to their individual characteristics, each wooden ear cup has a unique grain and color tone, making each pair of headphones truly one of a kind. The raw wood is first cut to size with precision using CNC milling. To achieve a perfect finish, FiiO then apply a high-gloss lacquering process in which the wood is repeatedly sanded, polished, and the natural pores and unevenness are filled until the surface is completely smooth. Finally, a final coat of high-gloss lacquer is applied, bringing out the unique, natural grain of the wood. With a density and hardness far exceeding that of ordinary woods, purpleheart wood is not only naturally corrosion-resistant, but also helps to minimize resonance in the headphone ear cups. The result is a faster and clearer sound. *This wood comes from the tropical rainforests of South America and is known for its stunning purple-brown color and superior strength. It is often used for high-quality furniture, musical instruments, and decorative items. Its unique color is not artificially applied, but is the result of natural oxidation. With prolonged exposure to light and air, the color of the wood gradually darkens, eventually taking on a deeper purple-brown or chestnut hue. Large 60 mm dynamic driver Enjoy deep bass and a wide soundstage Like the FT1, the FT13 features a massive 60 mm dynamic driver, a size that is almost unheard of in its category. This larger driver produces more power and converts electrical signals into sound more efficiently. The result is sound with less distortion, faster transients, and deeper, more powerful bass. Wool composite nanofiber wood cone European wood, honed from over 100 years of paper manufacturing expertise The new cone is made from birch wood sourced from the cold climates of Europe. The extreme cold makes the wood incredibly hard and gives it strong fibers. This unique property allows us to precisely tune the resistance and stiffness of the diaphragm during manufacturing to achieve our desired sound goals. Using the same traditional paper-making process as for the FT1 cone, a method that has been around for over 100 years and is still widely used by various hi-fi brands, the raw materials are processed into pulp through soaking, steaming, and beating. During this process, lighter and harder carbon fiber threads are added to increase the stiffness of the diaphragm and reduce unwanted breakage, improving detail in the high frequency range. The diaphragm is then baked and molded to a thickness of only 0.1 mm. By adding wool fibers to the paper diaphragm, FiiO take advantage of their natural flexibility to fine-tune the sound. This gives the finished diaphragm a uniquely natural and warm sound character that is both captivating and profoundly emotional. W-shaped diaphragm Proprietary acoustic technology for higher efficiency The headphones feature a W-shaped diaphragm design inspired by speaker diaphragms. Compared to the driver diaphragms typically used in headphones, this design increases the effective vibration area of the diaphragm by 25.8%. The diaphragm consists of a hard dome and a flexible surround. This rigid dome covers a larger surface area than conventional diaphragms, and since it is driven directly by the voice coil, less energy is lost during vibration transmission. Compared to a more flexible material, the hard dome has lower internal losses, resulting in higher efficiency and lower distortion due to driver breakup. Closed design Greater immersion through reduced noise, enjoy pure, quiet sound Beyond the natural isolation of its closed wooden ear cups, the FT13 features an integrated system of passive noise reduction components. These include a standing wave dissipation chamber, specially designed sound-absorbing cotton in the rear cavity, and a noise-reducing U-shaped tube. Together, these components can reduce everyday ambient noise by up to 26 dB. The closed design also prevents sound from escaping, making the headphones perfect for quiet environments such as offices, libraries, or dorm rooms without disturbing others. U-shaped damping tube An invisible hand that reduces resonance Inside the FT13, a U-shaped damping tube cleverly uses the air inside the headphones to tune the sound. The design of this tube has been carefully optimized to lower the resonance frequency of the cavity, resulting in deeper, higher-quality bass. Low impedance, high sensitivity, easy to drive Your entry-level headphones The impedance, sensitivity, and frequency response of the FT13 make it the ideal choice for listeners taking their first steps into the world of personal audio equipment. It pairs perfectly with popular, non-audiophile devices such as smartphones, tablets, and PCs. Experience high-fidelity sound in audiophile quality without having to invest in expensive or complex equipment. Large CCAW voice coil Lightweight, wide, powerful The FT13 features a CCAW voice coil imported from Japan with an ultra-thin 0.035 mm wire and a lightweight KSV body. These components significantly reduce the moving mass of the diaphragm, resulting in faster sound reproduction and less unnecessary reverberation. The voice coil has a diameter of 25 mm. In a fixed magnetic field and at constant current, a larger coil diameter means a longer voice coil wire. A longer copper wire thus results in greater driving force and higher efficiency, leading to a richer midrange and faster transients. Adjustable magnesium alloy headband Advanced materials, improved comfort The FT13 offers a significant improvement in headband comfort through comprehensive improvements in materials, aesthetics, and ergonomics. The outer U-shaped frame is now made of a strong and lightweight magnesium alloy that blends seamlessly into the design of the headphones. The ball-bearing slider features a high-quality design found in high-end headphones, offering a silky-smooth adjustment with clear feedback, while the swivel joints and connections are more robust than ever. The part of the headband that comes into contact with your head has been replaced with soft, durable lambskin leather, which is both more durable and breathable than the synthetic leather commonly used, providing greater comfort during longer listening sessions. Three-axis swivel mechanism Swivels as desired, freely adjustable After extensive ergonomic testing, FiiO implemented a three-axis adaptive swivel mechanism that continues the FT series' tradition of excellent ergonomics. This design not only ensures that the headphones comfortably adapt to different head sizes and shapes, but also allows for a perfect fit without sound leakage. Angled driver design Reduces standing waves for clearer sound In the FT13, the acoustic drivers are angled to run parallel to your ear canals, so the sound reaches your eardrums directly. This not only reduces the high-frequency drop you would get with a conventional design, but also minimizes standing waves inside the ear cups. The result is a much clearer, purer sound with less distortion. Furukawa monocrystalline copper + silver-plated oxygen-free copper Improved cable, improved sound This cable is constructed with an 8-strand braided design and contains a total of 1,000 conductor wires. It is a blend of 500 secondary-melted Furukawa single-crystal copper wire conductors and 500 oxygen-free silver-plated copper wire conductors, each with a polarity of 17 AWG. This combination of high-quality metals and advanced processing techniques enables the cable to deliver truly outstanding sound quality. Furukawa single-crystal copper Increases the richness and density of the midrange and improves bass quality, making the mid and low frequencies sound full and emotional. Silver-plated oxygen-free copper, the silver plating helps to improve the conductivity and high-frequency transmission characteristics of the copper, enhancing sound transparency with more detail and optimized overtones, as well as an expanded soundstage. Lambskin/suede ear pads Velvety texture, reliably durable Two types of ear pads are included, both of which feature a skin-friendly, breathable, and durable outer material. Inside the ear pads is a low-density, slow-rebound memory foam that conforms to the shape of the ear. Compared to the synthetic leather ear pads commonly used in headphones, these offer both greater comfort and a longer service life. The high-quality ear pads made of natural lambskin have a velvety smooth surface that is also breathable, sweat-resistant, and easy to clean. In terms of sound, these ear pads deliver detailed highs, clear and clean mids, and fast bass. The suede ear pads have a matte texture, are durable and flexible, yet cool and breathable. In terms of sound, these ear pads enhance the bass, add richness to vocals, and enhance the sense of atmosphere. Four detachable plugs included Wide compatibility The FT13 comes with four detachable audio plugs, allowing one cable to be used with different audio sources. Hi-Res Audio certified Reliably excellent sound The certification is not only proof that the headphones meet international standards, but also of our continuous pursuit of better sound quality. Yaoli linen storage bag Stylish and dust-proof, so you don't have to worry The headphones come with a high-quality Yaoli linen storage bag, which further enhances the ownership experience. With materials and workmanship that rival those of premium French brands, its exquisite quality and excellent texture provide special protection for your valuable device. 3 significant improvements Improved sound: Compared to the spruce wood diaphragm of the FT1, the FT13 features a birch wood diaphragm that is many times harder to improve the precision of the diaphragm. In addition, carbon fiber has been added to increase the stiffness of the diaphragm and reduce unwanted driver interruptions, resulting in higher treble resolution compared to the FT1. Improved cable: Compared to the FT1's silver-plated oxygen-free copper cable, the FT13's secondary-refined Furukawa monocrystal copper and high-purity oxygen-free silver-plated copper cables are an improvement in every respect. The materials used, the number of wires, and even the wire diameter have been improved, resulting in a comprehensive improvement across the entire frequency range (lows, mids, and highs).Improved comfort: Compared to the FT1, the FT13 offers comprehensive ergonomic improvements. Both the headband and ear pads have been replaced with more breathable materials that are also wear-resistant and less prone to flaking. The headband is made of a lighter magnesium-aluminum alloy, and the feel and design of the ball-bearing slider have been improved. Specifications Headphone type: Closed dynamic headphones Frequency response: 7 Hz–40 kHz Driver: 60 mm dynamic Impedance: 32 Ω Sensitivity: 98 dB/mW at 1 kHz, 113 dB/Vrms at 1 kHz Weight: approx. 356 g (without cable) Ear cup pressure: 4.2 N ± 0.3 N Cable material: Secondary refined monocrystalline copper from Furukawa + silver-plated oxygen-free copper Cable length: approx. 1.5 m Cable headphone connector: dual 3.5 mm (TS) Audio plug: 3.5 mm/4.4 mm Ear cup material: Purpleheart wood Ear cup colors: Natural wood/black What`s in the boxHeadphones*1 Storage case*1 Storage pouch*1 Cleaning cloth*1 FT13 packaging box*1 Headphone cable*1 3.5 mm single-ended plug, detachable*1 4.4 mm balanced plug, detachable*1 (pre-installed on headphones) 3.5 mm to 6.35 mm adapter*1 4.4 mm jack to XLR-4 plug adapter*1 Lambskin ear pads*1 (pre-installed on headphones) Suede ear pads*1 Quick start guide*1

FiiO FT3 - 32 Ohm variantFinally, a great over-ear from FiiO - now finally available as a variant that is ideal for mobile use!     Large dynamic High-Res Over-Ear headphones     60 mm large dynamic LCP/aluminium coated driver     32Ω high impedance     Asymmetrical internal and external magnetic circuit system     Open-back design     392 strands of monocrystalline copper cable     Anodised aluminium construction     Lightweight, hollow design     4 different audio connectors included High-end hi-fi, easily accessible32-Ω design A sense of relaxation wrapped in dense mids and bass The 32-Ω version of the FT3 focuses on delivering lush but very textured mids and bass. The bass is very present and robust, yet very controlled and detailed. The mids are also lush and relaxed, making the FT3 very pleasant to listen to.60 mm large dynamic driverSound is created by the vibration of material - so the choice of driver is very important to sound quality. The FT3 features a large 60 mm dynamic driver, which is unusual in its class. Compared to a smaller driver, the FT3 can expel more air and convert the energy into sound more efficiently - resulting in a more natural yet robust sound with a wide soundstage.The FT3's large dynamic driver has other advantages as well. For example, the diaphragm's size enables it to carry a higher output power, resulting in less distortion from large dynamic signals. In addition, the larger driver is more easily able to produce lower frequencies to achieve deeper bass.Sophisticated design - Beryllium-coated gasket + DLC diaphragm.The diaphragm is one of the most important components of a dynamic driver. And not every diaphragm material can meet the FT3's requirements due to the large driver size. After countless tests at FiiO, an LCP/aluminium coated driver/seal was chosen for the more portable 32 Ohm version. The seal of the FT3 driver is coated with aluminium. This not only results in a lighter gasket (and thus a lighter driver), but also a stiffer gasket that is better able to handle the movements of the large dynamic driver, resulting in less distortion. The FT3's diaphragm is made of LCP, which is very robust and lightweight compared to other diaphragm materials. This means that the FT3 driver is less prone to breakage and therefore non-linear distortion, while at the same time having an extremely extended frequency response and improved soundstage.Pure sound - 32Ω high impedance.The voice coil is made of ultra-fine copper-clad Japanese aluminium with a diameter of only 0.035mm. This finer voice coil allows the driver to follow signals better and faster, has anti-interference capabilities and enables thunderous dynamics over a wide frequency response range.Hear the artist's intent - Asymmetrical internal and external magnetic circuit system.The FT3 uses powerful N52 neodymium magnets to maximise sound quality at an impedance of 32Ω. These magnets are arranged in an optimised asymmetrical internal and external magnetic circuit system. When the voice coil begins to move during sound reproduction, the optimised magnetic circuit compensates for this voice coil and diaphragm movement, especially during large dynamic changes - allowing more effective use of magnetic energy and better control over the voice coil.Quality cable - monocrystalline copper wireThe FiiO FT3 comes standard with a 1.5m m cable with a diameter of 23 AWG, made of high-purity monocrystalline copper wire.Outer shell material: TPEShielding layer: PCOCC-A (26/0.12X2)Insulating layer: PFA Conductor: PCOCC-A (3/20/0.8X2AWG23)Outer diameter: 2.4mmx2 (parallel structure)Widely compatible - 4 interchangeable audio connectors are standard The FT3 cable is equipped with the following 4 types of interchangeable connectors:3.5mm / 4.4mm interchangeable plugs3,5-mm-auf-6,35-mm-Adapter4.4mm to XLR-4 balanced adapter*The interchangeable audio plugs are officially patented by FABRILOUS.Lighter and stronger - aluminium alloy construction.The FT3's exterior is made entirely of aluminium alloy, which is not only luxurious to the touch, but also very strong yet lightweight. This gives the FT3 the perfect combination of a comfortable listening experience and enough durability to withstand life's challenges.Full comfort - with lightweight, hollow mesh designThe FT3's design starts with hexagonal elements as a base, which combine with the usual look of open-back headphones to create a bold sci-fi appearance. The open-back design features a hollowed-out mesh to not only further reduce weight and increase listening comfort, but also to fully showcase the driver's capabilities in a more open environment.Removes a layer of veil from your music - Open DesignThe FT3 features an open-back design that reduces unwanted vibration and resonance, resulting in a bigger soundstage because when the driver pushes air into the cabinet, the open back means the air hits it. The result is that details in the music are reproduced more clearly and naturally in a wide, open soundstage, as if you were listening to a live performance.Freely rotatable 3-axis swivel designThe FT3 has been extensively tested for fit in the FiiO labs, and the 3-axis swivel design is a result of this testing. The 3-axis swivel design has been specifically developed to allow the FT3 to better fit a variety of head and face shapes, improving comfort and seal and maximising sound quality.Innovative details - angled drivers parallel to the earThe FT3's drivers are angled so that they are parallel to the ear when worn. This helps reduce the high frequency response caused by waves hitting the contour of the ear rather than entering it. Angled drivers can also minimise unwanted reflections caused by the headphone cup that would result in standing waves, and also reduce frequency response distortion. In addition, the back of the FT3 cone features a reflective tip specifically designed to direct the sound waves generated by the driver so that unwanted reflections do not interfere with each other, reducing both sonic errors and unwanted artefacts in the frequency response.Rich sounds2 sets of different sounding ear padsThe FT3 comes with 2 sets of ear pads, each with a different soundVelour ear pads: Balanced sound, enhanced atmosphere, majestic experienceLeather replica ear pads: Clear sound, large soundstage, high detailThorough protection - storage bag includedThe FT3 comes with a storage bag that provides comprehensive protection for your headphones in a lightweight but luxurious package.FiiO FT3 Basic SpecificationsHeadphone type: Dynamic driver headphonesFrequency range: 7Hz-40kHzDriver type: 60mm dynamic driverDiaphragm material:LCP aluminium metal plated + aluminum metal diaphragmImpedance: 32ΩSensitivity: 110dB (1Vrms)@1kHzWeight: Approximately 391g (without cable)Ear cushion pressure: 4.0N±0.3NCable length: Approx. 1.5mCable material: 392 strand monocrystalline copper wireHeadphone connector: Dual 3.5 mm Wide range of accessories 3.5 mm interchangeable plug / 4.4 mm interchangeable plug / 3.5 mm jack to 6.35 mm plug adapter / Balanced adapter from 4.4 mm jack to XLR-4 plugStorage case2 pairs of ear pads

FiiO FT3 - 350 Ohm Version Large Dynamic High-Res Over-Ear Headphones 60mm large dynamic driver Beryllium-plated gasket + DLC diaphragm 350Ω high impedance Asymmetric internal and external magnetic circuit system Open-back design Furukawa monocrystalline copper cable Aluminum alloy construction Lightweight hollow design 4 different audio plugs included Vast sound quality headroom, Experience pure “blackground”The FT3 350Ω version features a black background, or a “blackground” for a true high-end sound experience. The 350Ω design also gives you much room to explore its sound quality. With a powerful, high-quality amplifier you can tap into the vast sound potential of the FT3 350Ω version – experience its fully extended treble and bass, vast soundstage, and ultimately relaxing yet powerful soun Art of harnessing energy for great sound - 60mm large dynamic driverSound comes from the vibration of material – thus, the choice of the driver is quite important in determining sound quality. The FT3 features a large 60mm dynamic driver, uncommon in its class. Compared to a smaller driver, the FT3 can push more air and convert energy into the sound more efficiently – resulting in a more natural yet robust sound with an expansive soundstage.The FT3’s large dynamic driver also has other benefits. For example, due to its large size, the diaphragm is capable of bearing higher output power, leading to less distortion under large dynamic signals. Also, the larger driver is more easily able to produce lower frequencies for deeper reaching bass. Thoughtfully designed - Beryllium-plated gasket + DLC diaphragmThe diaphragm is one of the most important parts of a dynamic driver. And not just any diaphragm material can meet the demands of the FT3 due to the large driver size. After countless testing at FiiO, a beryllium-plated gasket + DLC diaphragm was chosen.The FT3 driver gasket is plated with beryllium. This not only results in a lighter gasket (and thus a lighter driver), but also a more rigid gasket better able to handle the movement of the large dynamic driver for less distortion. The diaphragm of the FT3 is made of DLC (Diamond-Like Carbon),  – which is both highly sturdy and lightweight compared to other diaphragm materials. This means that the FT3 driver is less prone to breakup and thus nonlinear distortion, while also having an extremely extended frequency response and improved soundstage. Pure sound - 350Ω high impedanceThe FT3 was designed with great sound as the primary goal, and features 350Ω impedance to achieve that. Compared to lower impedance headphones, higher impedance headphones more effectively filter out noise to the listener resulting in a purer sound with higher signal-to-noise ratio performanceThe voice coil is made of ultra-fine Japanese copper-clad aluminum only 0.035mm thick in diameter. This finer voice coil allows the driver to better and more quickly follow signals, has anti-interference capabilities, and allows for thunderous dynamics across a wide frequency response range.Hear the artist’s intent - Asymmetrical internal and external magnetic circuit systemThe FT3 utilizes powerful N52 neodymium magnets to maximize sound quality under its 350Ω impedance design. These magnets have been arranged in an optimized asymmetrical internal and external magnetic circuit system. When the voice coil starts to move during the reproduction of sound, the optimized magnetic circuit balances this movement of the voice coil and diaphragm, especially during large dynamic changes - which allows more effective use of magnetic energy and better control over the voice coil. Quality cable - Furukawa monocrystalline copper wireStandard with the FT3 is a 3m, 23AWG diameter cable consisting of high-purity Furukawa monocrystalline copper wire.Outer shell material: TPEShielding layer: PCOCC-A (26/0.12X2) Insulating layer: PFA Conductor: PCOCC-A (3/20/0.8X2AWG23)Outermost diameter: 2.4mmx2 (parallel structure)Widely compatible - 4 swappable audio plugs come standardThe FT3 cable features swappable plugs of the following 4 kinds:3.5mm/4.4mm swappable plugs3.5mm to 6.35mm adapter4.4mm to XLR-4 balanced adapter*Interchangeable audio plugs are officially licensed from the patent by FABRILOUS.Lighter and stronger - Aluminum alloy constructionThe exterior of the FT3 is made entirely of aluminum alloy that not only feels luxurious to the touch, but is also highly rigid yet lightweight. This gives the FT3 the perfect combination of being comfortable to listen to and being durable enough to withstand life’s challenges.Full of comfort - With a lightweight hollow mesh designThe FT3’s design begins with hexagonal elements as its base, and when combined with how open-backed headphones usually look, gives off a bold sci-fi appearance. The open-back design features a hollowed-out mesh to not only further reduce the weight for greater listening comfort, but also to fully unleash the capabilities of its driver in a more open environment. Removing a layer of veil from your music - Open-backed designThe FT3 features an open-backed design that reduces unwanted vibrations and resonances and results in a larger soundstage, since when the driver is pushing air in the housing the open-back means that air encounters. The result is that details in the music come through more clearly and naturally in a wide open soundstage, just as if you were listening to a live performance.Free to rotate - 3-axis swiveling designThe FT3 has undergone much fit testing in FiiO Labs, and the 3-axis swiveling design is one result of that testing. The 3-axis swiveling design was specifically made so that the FT3 could better fit a wide variety of head and face shapes for improved comfort and better seal to maximize sound quality.Innovative touches - Angled drivers parallel to the earThe FT3’s driver is placed at an angle to be parallel to the ear when worn, which helps to reduce high-frequency response caused by the waves hitting the contour of the ear and not entering it. Angled drivers can also minimize unwanted reflections caused by the shell of the headphone that would cause standing waves and also reduce frequency response distortion. Additionally, towards the rear of the FT3’s shell is a reflective tip that is specifically designed to direct soundwaves produced by the driver to prevent unwanted reflections from interfering with each other, to both further minimize sound flaws and reduce unwanted frequency response artifacts. Rich sounds - 2 sets of distinct-sounding earpadsThe FT3 comes with 2 sets of earpads, each with their own soundSuede earpads: Balanced sound, enhanced ambience, majestic experienceImmitation leather earpads: Clear sound, large soundstage, highly detailedThorough protection - Storage bag includedThe FT3 comes with a storage bag, which comprehensively protects your headphones in a light yet luxurious feeling package.FT3 Basic specificationsHeadphone type: Dynamic driver headphonesFrequency response: 7Hz-40kHzDriver type: 60mm dynamic driverDiaphragm material: Beryllium-plated gasket + DLC diaphragmImpedance: 350ΩSensitivity: 102dB (1Vrms)@1kHzWeight: About 391g (excluding cable)Earpad pressure: 4.0N±0.3NCable length: About 3mCable material: Furukawa monocrystalline copper wireHeadphone connector: Dual 3.5mmAbundant accessories3.5mm interchangeable plug    4.4mm interchangeable plug    3.5mm female to 6.35mm male adapter    4.4mm female to XLR-4 male balanced adapter    Storage case    Imitiation leather earpads    Suede earpads

FiiO FT5     Open magnetostatic 90 mm planar headphones     Easy to drive even when mobile     Large 90mm planar magnetic driver - Ultra-thin 6µm diaphragm     Coil made of micron-coated aluminum-silver alloy     Open construction / Lightweight magnesium alloy construction     20 neodymium magnets per driver     High sensitivity, easy to drive 110dB/1Vrms@1kHz and 96dB/mW@1kHz     Includes high-purity monocrystalline copper cable (392 strand)     Includes 2 types of ear pads (velour - balanced sound, enhanced ambience, gorgeous / leatherette - powerful clear sound, wide soundstage, very detailed)     4 types of plugs/adapters included (3.5mm / 4.4mm / 6.35mm / 4-pin XLR) Discover manufacturing and technology in the micrometer rangePlanar magnetic drivers lie between dynamic and electrostatic headphones in terms of sound. As with dynamic headphones, there is a kind of coil on the planar driver. Similar to electrostatic headphones, the diaphragm is a special type of thin foil in the micrometer range. These properties of the planar driver make it possible to develop headphones that not only sound very detailed, but can also be easily powered. The FT5 is the first planar magnetic headphone from FIIO that gives your sound the energy of a thunderstorm.Large 90 mm planar magnetic driverThe FIIO FT5 has an outstanding large 90 mm planar magnet driver. Compared to a conventional dynamic driver, a planar magnet driver converts sound energy into sound waves in a more balanced way by vibrating much more evenly. The vibrations are distributed over the entire diaphragm of the driver and there is hardly any distortion caused by the stiffness of the diaphragm material. This allows the FIIO FT5 to reproduce audio signals truthfully and accurately, faithfully reproducing every single note and giving you lossless hi-fi sound.Thin as a cicada's wing - ultra-thin 6μm diaphragmWhen designing the FiiO FT5, the development team didn't just blindly chase bigger (or smaller) numbers - rather, everything was designed to meet stringent sound performance targets. FiiO realized that a diaphragm that is too thin can easily cause the coils attached to the diaphragm to fall off, leaving the user with unusable headphones. Therefore, after extensive testing, the FiiO development team determined that a thickness of 6μm was the ideal balance between sound performance and reliability. For the diaphragm itself, the FiiO development team investigated various materials such as PET, PEI and PAR. After extensive sound quality and reliability testing, the development team chose PAR thanks to its superior performance on the above criteria compared to other materials. The PAR diaphragm is not only the backbone of the FT5's excellent dynamics and highly detailed sound, but also of the rich bass not normally found in headphones with planar magnet technology.Coils made of micron-coated aluminum-silver alloyIn a flat driver diaphragm with a printed coil, almost all the weight is concentrated on the metal-coated coils. When developing the FiiO FT5, R&D engineers had to consider not only how the coils would interact with the 6 μm thin diaphragm, but also the density and conductivity of the coils themselves. After examining and testing various common materials used to make planar coils, FIIO engineers concluded that the lighter aluminum alloy material was best suited for the coils. They also found that the addition of silver metal would improve the conductivity of the coils, making it easier to power the driver without losing the high-frequency detail and full sound characteristic of good planar magnet drivers.Nanoscale diaphragm coating High-end sound that is truly audibleThe coils of the FT5 driver are printed onto the diaphragm using high-end technology from the semiconductor industry, which not only makes the thickness of the coils more uniform, but also distributes the weight of the coils more evenly - ultimately resulting in more uniform diaphragms for a more precise sound.20 neodymium magnets per driver - the way to balanceTo ensure greater wearing comfort, 11 magnets are placed on the inside and 9 magnets on the outside of the FT5 flat magnet driver, resulting in 20 magnets per channel and a total of 40 magnets for the entire headphones. Due to the balanced arrangement of the magnets, the aluminum alloy coils are evenly distributed in the magnetic field. In addition, the driver's diaphragm is balanced between the forces of the inner and outer magnets, ensuring smooth movement of the driver and therefore less distortion for higher fidelity.The power of balanceThe FT5 uses N52 neodymium magnets with a magnetic density of up to 1.5T to generate the strong forces required to drive the large planar magnetic driver. These magnets are arranged parallel to the coils of the driver so that the coils are evenly distributed in the magnetic field to maximize the driving force of the headphones and utilize the full potential of the planar magnetic driver.High sensitivity and easy power supplyPlanar magnetic headphones traditionally have low sensitivity, leading many users of such headphones to use a large desktop audio device to realize their full potential. Planar magnetic headphones traditionally cannot be heard sufficiently when traveling.However, the FT5 is not like traditional planar magnetic headphones. Thanks to 20 neodymium magnets with a high magnetic density of up to 1.5T, a 6μm thin diaphragm and nano-level aluminum alloy coating technology, the FT5's driver is both lightweight and strong, enabling a high sensitivity of 110dB/1Vrms@1kHz, i.e. 96dB/mW@1kHz. This allows the FT5 to be easily driven by portable players, so you can experience the full sound wherever you go.Lightweight magnesium alloy constructionThe design of a planar magnetic driver involves the number of magnets to be used and their stacking, with more magnets meaning more weight. Therefore, the materials that make up the outer shell of a planar magnetic headphone must be carefully selected to balance sound quality and weight. The FiiO FT5 is made from a magnesium alloy. Since a magnesium alloy has only 64% of the density of an aluminum alloy, the FT5 can be built much lighter, allowing for long and comfortable listening.Better performing metal constructionWhen designing the FT5, the FiiO development team paid particular attention to the strong vibrations generated by the massive 90 mm planar magnet driver. This is why the FT5 is made of metal, which is much better able to withstand the vibrations generated by the driver - such as those caused by playing bass-heavy tracks - than a plastic housing.Open designTo maximize its potential, the FT5 also features a specially designed open back acoustic structure. The rear of the driver enclosure has been carefully designed to act as a baffle to isolate the sound waves at the front and rear of the driver enclosure. The FT5's grille is scientifically designed to control and precisely accelerate the airflow as the speaker moves. This not only gives the FT5 a treble resolution unmatched by dynamic headphones, but also a wide and expansive soundstage that further immerses you in the symphony.Conversation with an engineerEvery detail contributes to excellent sound "In a dynamic driver, the voice coil vibrates, causing the entire diaphragm to vibrate to produce the sound. However, this can easily lead to uneven vibrations across different parts of the diaphragm, resulting in distortion when reproducing higher frequencies. The diaphragm of a planar magnetic loudspeaker is a large flat surface on which the coils are distributed and which is moved by a uniform magnetic field. In contrast to dynamic loudspeakers, the sound of a planar magnetic loudspeaker is produced by a more uniform movement of the entire membrane, resulting in less uneven oscillation between the different parts and therefore less distortion. The principle of sound generation of planar magnetic drivers is most similar to that of electrostatic drivers. Compared to dynamic drivers, the biggest advantage of planar magnetic drivers is their excellent high-frequency performance, thanks to the extremely thin diaphragm of the driver. Because the FT5's diaphragm, which is only 6 µm thick, is driven by many parallel magnets, the planar magnet driver is extremely responsive and dynamic, delivering a truly satisfying level of detail."Joseph Chief Engineer of FIIO IEM's R&D CenterProfessional design that really moves you - Excellent phase coherence throughout the frequency rangeThe FiiO FT5 is a planar magnetic headphone in which the coils of the planar driver are distributed over the entire diaphragm. In contrast to dynamic drivers, which only vibrate at certain points, the entire diaphragm surface of the planar driver vibrates. This leads to a more synchronized movement over the entire driver and thus to a better phase distortion compared to dynamic drivers. Through simulations and analysis of a large amount of experimental data, the FT5 planar driver's coils have been optimally placed to ensure an evenly distributed magnetic field for consistent phase performance across all frequencies - for a clear and true listening experience.Follow your heart without constraint 3-axis swivel capabilityThe FT5 features the excellent 3-axis swivel design used on other FT Series headphones. This allows the ear cups to rotate freely and attach to your head, regardless of the angle or size of your head, providing a better quality and seal.Good sound, made from good materials - 392 wires of high-purity, silver-plated, monocrystalline copper cableThe FiiO FT5 comes with a 1.5 m cable consisting of 392 wires of silver-plated monocrystalline copper, each wire having a diameter of 23 AWG. The copper wires provide a solid and highly detailed sound that is passed directly to you without loss.Widely compatible - 4 interchangeable audio plugs includedThe FT5 comes with 4 interchangeable audio plugs:3.5mm/4.4mm interchangeable plugs3,5-mm-auf-6,35-mm-Adapter4.4mm to XLR-4 balanced adapter*The patent for interchangeable audio plugs has been licensed by FABRILOUS.Fully protected - case includedThe FT5 comes with a lightweight yet luxurious case that comfortably protects your headphones.

Open planar headphones 106 mm planar driver Patented gold+silver multi-layer coating 1μm thin special membrane Zebra wood grille Uniform magnetic field 18x N52 neodymium magnets per driver 427g lightweight Carbon fiber construction 2 different ear pads included Liquid nitrogen-frozen monocrystalline copper cableCustom Yaoli linen storage bag Proprietary driver, a highlight of many technologies 106 mm planar driver “When I listen to a large 15-inch speaker, I feel its rich energy reserves, how effortlessly it reproduces sound, and the low-frequency energy that pushes the air forward, which the listener can feel—it creates a real sense of presence. This time, I've transferred that experience to headphones with a newly developed and designed full-size 106mm planar driver. Several innovative acoustic patent technologies are used to further enhance the ultra-low frequency response capabilities of planar headphones.” -Joseph Chief Engineer of the FiiO IEM R&D Center Gold and silver bring out the best in each other Patented multi-layer gold and silver coating of the coils The FT7 uses FiiO's proprietary planar driver technology*—a patented multi-layer coating system. The planar driver uses high-performance PET as the diaphragm substrate and selectively applies gold and silver to create a multi-layer coated driver, thus utilizing the advantages of these two precious metals. This allows the FT7 to deliver an extremely detailed yet charming sound. Gold: Gold has a high density, very high internal resistance, and excellent ductility. The additional gold coating improves the damping of the membrane, making the mid and low frequencies sound relaxed and pleasant. Silver: Silver is characterized by low resistance and high electrical conductivity. High-frequency currents flow quickly and with minimal loss through pure silver material, resulting in very detailed highs. In addition, silver is not very dense and is lightweight, which improves the sensitivity of the driver. *Patent number: ZL2024205488218 Top-of-the-line planar driver 1μm thin diaphragm Engineers have constantly strived to develop thinner and lighter diaphragms for planar drivers. After two years of independent research and development, FiiO has developed a class-leading, ultra-thin 1μm diaphragm for the FT7, which uses high-performance PET as the carrier material. The difference between a 2μm and a 1μm diaphragm thickness results in noticeable performance differences when the diaphragm vibrates at high speeds, which ultimately affects the sound quality. The FT7's ultra-thin 1 μm diaphragm is exceptionally light and can respond at lightning speed. It reproduces even subtle sounds in the ultra-high frequency range faithfully and offers an exceptional dynamic range. *The driver is printed with the words “Designed and manufactured by FIIO”. Advanced technology for advanced sound 28 nm process technology To ensure that the driver diaphragm can be manufactured to a sufficiently high standard, the FiiO FT7 driver is manufactured using a 28 nm process. Inspired by the coating technology used in the semiconductor industry, this technique completely isolates the conductive circuit material from the ambient air. The conductor material is placed in a vacuum with a pressure of 6.6 × 10-³ pascals, and the temperature is raised to 120 °C. The conductor material is converted into ionized particles, which then accumulate on an ultra-thin 1 μm film through the principle of charge attraction. This process achieves the desired layer thickness for optimal acoustics and significantly increases the durability and service life of the conductor tracks*. *Contrary to popular belief that planar drivers have a short service life, the proprietary driver was subjected to aging tests in FiiO laboratories for over a year. During this test period, there were no cases of delamination, separation, or wire breakage in general. The sound quality continues to meet standards. Flowing stripes, a natural work of art Natural zebrawood grille The front cover of the FT7 grille is made of zebrawood sourced from West Africa from trees that normally grow at an altitude of 1,600 meters. Its grain resembles the flowing patterns of a zebra, a dynamic animal that well represents the unique wilderness of the West African highlands. Each grille strip is precisely aligned with the magnet positions, resulting in a reduction in sound wave interference caused by reflections from the grille. Balanced energy, even power Patented uniform magnetic field design Finite element analysis shows that conventional rectangular magnet designs have uneven magnetic fields, with some areas particularly strong and others weak. This results in uneven forces acting on the voice coils within the magnetic field, which can cause the driver to fail due to uneven movement and thus lead to distortion. The FT7 is equipped with FiiO's patented acoustic technology – the Uniform Magnetic Field Design. Through the optimized arrangement of the magnetic circuit and the use of magnets with rounded corners, FiiO is able to achieve a uniform magnetic field that ensures that all parts of the planar driver diaphragm are evenly loaded. This reduces driver breakup and minimizes distortion. Patent No.: ZL202420884963.1 Thanks to the patented uniform magnetic field design, the magnetic field area is expanded. This not only contributes to the high sensitivity of the FT7's large 106 mm driver, but also helps to reduce the weight of the driver, thereby improving wearing comfort. Each driver in the FT7 features 18 powerful N52 neodymium magnets with a magnetic flux of up to 1.5 T. The magnets provide ample energy reserves for excellent transient response and structured bass. 5-40kHz wide frequency response, hear every detail Flagship quality, but easy to carry, weighing 427g Comfort is something FiiO has always paid attention to. Although the FT7 has a large 106mm planar driver, it weighs only 427g, which is exceptional among high-end planar headphones. Large carbon fiber housing No expense has been spared to reduce the weight of the headphones as much as possible. As a result, much of the headphones are made of lightweight, high-strength carbon fiber, making the FT7 comfortable to wear even during long listening sessions. Cryogenic treatment at -192°C Liquid nitrogen-frozen monocrystalline copper cable A new cable made from over 6N OCC (99.99998%) high-purity monocrystalline copper has been specially developed and tuned for the FT7 and its sound characteristics. The copper undergoes a 7-day low-temperature treatment with frozen nitrogen at -192°C. This accelerates the breakdown of internal stresses in the metal material and the alignment and narrowing of the crystal boundaries to improve electrical conductivity and signal transmission. This ensures that free electrons can flow smoothly from one atom to another in the conductor, improving sound quality. In addition, PFA with a dielectric constant of only 2.1 is chosen as the insulating layer for the cable. PFA has damping and shock-resistant properties that can also contribute to the sound image. Planar headphones generally have high resolution but tend to sound a little “dry.” The PFA insulating layer not only preserves the high resolution of the single-crystal copper wire, but also helps to adjust the mid and low frequencies, adding a touch of richness to the sound for a relaxed and enjoyable listening experience. Cable specifications: Conductor cross-sectional area: 4x21AWG Conductor material: 6N OCC (99.99998%) High-purity monocrystalline copper Conductor structure: Axially twisted Insulation material: PFA Dielectric constant: 2.1 Inner jacket: TPU Outer jacket: Nylon Length: approx. 3m Cable outer diameter: Approx. 7.5*4.5 mm A rich listening experience Two sets of ear pads included The FT7 comes with two sets of ear pads, each offering a different sound. Sheepskin: clear sound, wide sound stage, very detailed Suede: skin-friendly and breathable, enhances the atmosphere of the music and improves the depth of voices.Wide compatibility Two audio adapters included The FT7 features a symmetrical 4.4 mm cable that is easy to replace and use. The cable is made of carbon fiber and forms a uniform design language with the headphones themselves. Two adapters are also included: 4.4 mm to 6.35 mm adapter 4.4 mm to XLR-4 symmetrical adapter. Included headphone storage bag The included storage bag is made of Yaoli linen, which is comfortable to carry thanks to its soft texture and exudes subtle luxury thanks to its gentle sheen. It is densely woven, wear-resistant, and does not crease. Hi-Res Audio certified The FT7 has been certified as Hi-Res Audio capable by the Japan Audio Society (JAS) and the Consumer Electronics Association (CEA). This is proof that the headphones are capable of reproducing audio signals faithfully and accurately, just as they were intended to be heard. What`s in the box:FT7 Headphones*1 Linen storage bag*1 Headphone cable*1 Symmetrical XLR-4 plug to 4.4 mm jack adapter*1 4.4 mm to 6.35 mm adapter*1 Sheepskin ear pads*1 pair (pre-installed) Suede ear pads*1 pair FT7 box* 1 Quick start guide*1 Specifications: Open planar headphones Frequency response: 5Hz-40kHz Driver: 106mm proprietary planar driver Impedance: 25Ω±15% Headphone sensitivity: 94dB/mW@1kHz / 110dB/Vrms@1kHz Weight: Approximately 427g (without cable) Ear pad pressure: 4.2N±0.3N Cable material: 6N liquid nitrogen-frozen monocrystalline copper cable Cable length: Approximately 3m Headphone cable connection: Double 3.5mm TS audio plug: 4.4mm symmetrical

Open-back high-fidelity headphones Powerful dynamic 50 mm driver PEK+PU composite polymer diaphragm TIL voice coil frame CCAW voice coil Open-back design Angled driver design Removable and washable velvet ear pads Powerful N52 magnets Detachable dual cable (3.5 mm to 3.5 mm) with microphone Aluminum-magnesium alloy grille Expand your sound horizons with the Jade Audio JT3 FiiO continuously focuses on the needs of listeners and is dedicated to improving sound quality. By leveraging their sound expertise, they have gained a wealth of experience in research and development and incorporated a lot of feedback in their continuous pursuit of improvement. The result of these efforts is the JT3 open-back headphones. Large 50 mm dynamic driver Relaxed sound, powerful bass The JT3 features a premium 50 mm dynamic driver. Thanks to its size, it can move more air with greater force, delivering detailed sound with a spacious soundstage and powerful bass. PEK+PU composite polymer diaphragm Combining strengths for beautiful sound The diaphragm is made from a unique PEK and PU* composite material that combines the rigidity of PEK with the flexibility of PU. This fusion of soft and hard materials ensures both a lightweight design and excellent sound quality. A built-in brass damping ring minimizes distortion and unwanted breakup, ensuring that every nuance of the music is reproduced clearly. *PEK (polyether ketone) is a ketone-based, semi-crystalline thermoplastic known for its high rigidity and excellent resistance to high temperatures and chemicals. PU (polyurethane) is a high-performance synthetic polymer material that combines the best properties of rubber and plastic, offering exceptional strength and durability, making it suitable for a wide range of applications. TIL voice coil former and CCAW voice coil Lightweight materials, powerful performance The JT3's driver features a lightweight TIL former and a CCAW* voice coil. The TIL material offers excellent strength and high temperature resistance, preventing the voice coil from deforming during long listening sessions. The ultra-fine CCAW voice coil not only makes the diaphragm lighter, but also increases efficiency and sensitivity. The voice coil and former work together to improve the driver's sensitivity and its ability to reproduce sound details. *TIL is a composite material made of glass fiber and polyimide that is incredibly light, thin, and resistant to high temperatures. Since it is a non-metallic material, it is also free of magnetic eddy current losses. CCAW is a unique material with a copper-coated aluminum core that offers the ideal combination of the lightness of aluminum and the excellent conductivity of copper. Powerful N52 magnets High-quality magnets, strong dynamics The JT3 is equipped with powerful N52 magnets—the strongest in the industry. These magnets are the driving force behind the driver, significantly improving its responsiveness and overall performance. Open design Spatial sound, precise imaging With the JT3, FiiO uses an open design to reproduce the feeling of a natural listening environment. This design effectively eliminates the pressure build-up and standing waves typically found in closed headphones, delivering a wide and immersive soundstage with precise sound. Angled drivers Clear sound, directly into your ear The drivers are specially angled to better fit the contours of the human ear. This not only ensures more effective sound transmission, but also optimizes airflow within the ear cup for better acoustics. Velvety ear pads Pleasantly soft, removable, and washable The ear pads are made of elegant, smooth velvet and filled with memory foam. The velvet feels soft and comfortable, while its dense fibers ensure that it remains wrinkle-free and extremely durable. Since the pads are removable and washable, they can be easily cleaned and replaced, ensuring that your headphones will last for many years. Dual 3.5 mm to 3.5 mm cable with microphone Removable design, more comfort The cable, made of palladium-coated, oxygen-free copper wires, is easy to use thanks to dual TRS plugs and an intuitive labeling system (“left blue, right red”). The included 3.5mm to 6.3mm adapter allows you to connect to a wide range of devices. In addition, the cable itself is detachable, allowing you to swap cables to connect to an even wider range of sources, including both single-ended and balanced outputs. The integrated microphone and controls allow you to manage calls, play games, and more, giving you greater versatility. Aluminum-magnesium alloy grille Lightweight and fluid, refined feel The outer shell is made of a lightweight, smooth-textured aluminum-magnesium alloy with a perforated grille design that is both beautiful and lightweight. Thanks to the open design, sound escapes evenly from the ear cup, creating a spacious yet natural sound stage. Attention to detail Finely crafted, comfortable to wear The comfort and fit of the JT3 also reflect its craftsmanship and attention to detail. Behind its simple exterior lies a thoughtful design and solid, reliable quality. Lightweight 330 g Lightweight Ball bearing sliders Clearly defined size adjustments Stainless steel + zinc alloy headband Stable and secure fit.Specifications Headphone type: Open dynamic headphones Frequency response: 10 Hz–35 kHz Driver: 50 mm dynamic Impedance: 80 Ω at 1 kHz Sensitivity: 97 dB/mW at 1 kHz 110 dB/Vrms at 1 kHz Weight: approx. 330 g (without cable) Cable material: palladium-coated 4N oxygen-free copper Cable length: approx. 1.5 m Headphone connector: two 3.5 mm TRS connectors Audio plug: 3.5 mm What`s in the boxHeadphones*1 3.5 mm cable with integrated microphone*1 3.5 mm jack to 6.3 mm plug adapter *1 Storage bag*1 Quick start guide*1 Warranty card*1

Open-Back Planar Headphones 95x86mm proprietary planar driver 3µm ultra-thin diaphragm, Remarkably quick responses F.E.S. elastic system, Increased diaphragm elasticity, for greater movement Two-way heterogeneous high-density magnets, Strong magnetic field, for higher sensitivity Lightweight foldable design, Almost like wearing nothing Ergonomic headband Replaceable earpads and headband cushion, For a comfortable fit Detachable cable, Change it up to meet your listening needs 3.5mm+4.4mm headphone cables included Open-back design, Spacious soundstage, clean sound Four-axis rotation A culmination of various proprietary technologies and deep expertise in planar craftsmanship, all integrated into a lightweight, foldable design. Bringing the premium sound of planar headphones to the masses. 95x86 proprietary planar driver In-house tech making a large impact FIIO has poured much effort into developing the JT7’s driver from the ground up, controlling every aspect from diaphragm R&D to the voice coil and magnetic circuit.Being totally developed in-house means guaranteed consistent, excellent sound quality. The generously sized planar driver allows you to indulge in an expansive soundstage and powerful, energetic bass. 3µm ultra-thin diaphragm Light and agile movement, For brilliant treble For a planar diaphragm to deliver its signature quick vibration and sensitive response, it must be exceptionally thin. The JT7’s diaphragm measures just 3µm, enabling it to precisely capture minute changes in the electrical signal. The result is excellent transient response performance and brilliantly clear treble that will surely excite your ears. F.E.S.* (FIIO Elastic System) Increased elasticity, For richer bass The JT7 features the proprietary F.E.S. (FIIO Elastic System) design on the driver diaphragm, which incorporates multi-dimensional textures on that surface. These textures, similar to the surround ring on a dynamic driver, increase the diaphragm's elasticity. Compared to typical planar drivers, this innovation allows for precise control over internal stress, allowing the driver to move even more freely without added distortion. The result is effortless, enhanced bass with a greater presence. *F.E.S. (FIIO Elastic System): This elastic support system is designed to increase driver movement by introducing an additional dimension of deformation to the planar film, allowing the diaphragm to build elastic force to counteract internal stress. 28nm chip-grade manufacturing process Precision wiring, Seamless design The headphones are manufactured with the same premium process as the FP3, FT1 Pro, and FT7. Unlike more typical methods, the JT7 manufacturing process is derived from the high-precision plating used in the semiconductor industry - which enables the voice coil and diaphragm to be seamlessly integrated as one piece. This not only yields extremely fine coil wiring but also significantly boosts the coil's structural integrity and longevity. Two-way heterogeneous high-density magnets Strong magnetic field, For high sensitivity and easy drivability The JT7’s 92dB/mW sensitivity is thanks to the powerful magnetic field generated by high-performance two-way neodymium iron boron magnets. These magnets deliver robust and ample driving force to the planar driver, enabling a louder and fuller sound even from weaker audio sources. Lightweight foldable design Breaking the norm for portability Tipping the scales at just 318g, the JT7 is thoroughly unlike typical planar headphones that are much heavier, allowing you to more easily enjoy long listening sessions. The user-friendly foldable design allows you to easily swivel and make the headphones more compact, letting you easily put them away at home or allowing you to easily carry them when traveling. Ergonomic headbandFour-axis rotation for a precise fit The multi-axis ergonomic headband allows the earpads and joints to be flexible, ensuring an optimal fit that precisely contours to your ears and head. This precise fit guarantees accurate sound delivery while maximizing comfort, allowing you to dive deep into your music. Replaceable earpads and headband cushion Comfortable for even extended listening sessions The parts of the earpads in contact with the skin are made of a comfortable, highly breathable mesh material that reduces heat and stuffiness during extended listening sessions. Both the earpads and headband cushion are detachable, allowing for easy cleaning and replacement – ensuring they will last for longer. Detachable cable Highly flexible, Allowing for wide compatibility The JT7 features a detachable cable design and comes standard with several cables, all featuring dual 3.5mm headphone connectors - a 3.5mm single-ended cable, a 4.4mm balanced cable, and a 6.35mm to 3.5mm adapter. This allows you to match it with various sources and gives you a taste of the unique characteristics of different cables. Hi-Res Audio certified Professionally recognized, Excellent sound The JT7 is Hi-Res Audio certified, a testament to its reliably great sound. What`s in the boxHeadphones*1 3.5mm headphone cable*1 4.4mm headphone cable*1 6.3mm male to 3.5mm female adapter*1 Storage pouch*1 Quick start guide*1 SpecificationsModel: JT7 Color available: Black Headphone type: Open-back planar headphones Frequency response: 7Hz-40kHz Driver: 95x86mm planar magnetic driver Impedance: 18Ω@1kHz Sensitivity: 92dB/mW@1kHz 109dB/Vrms@1kHz Weight: About 318g (excluding cable) Cable material: High-purity oxygen-free copper Cable length: About 1.5m Headphone connector: Dual 3.5mm TRS Audio plug: 3.5mm/4.4mm

FiiO JT1     Dynamic 50 mm high performance driver - Great sound quality, without compromise     PEK+PU composite polymer cone - Low distortion     CCAW voice coil - Wide soundstage, robust, well-controlled bass     N52 high-performance magnets - Plenty of energy, robust sound     32Ω easy to drive Easy to drive     Lightweight design - Comfortable, for comfortable, long listening     Adaptive headband - Perfect fit, for comfortable listening     Quick-release ear pads - Can be removed with a twist     Detachable dual TRS cable - Widely compatible, convenient dual 3.5 mm to 3.5 mm in-line microphone cable Great sound - Top price/performance"In the products we want to make, we want to focus more on the core needs of the listener - with more focus on the acoustic components such as the driver units. We don't want to compromise - listeners should get a good sounding headphone at an affordable price that lowers the barrier for hi-fi sound." Quote: FiiORefined inside and out - Influenced by the communityIn developing the JT1, FiiO not only relied on the opinions of trusted listeners, but also conducted a major research campaign with a user-centered approach. FiiO looked at many other affordable headphones currently available, considered the opinions of influencers and gathered feedback from many customers, including participants in various audio shows around the world. FiiO sought the opinions of many people to develop a headphone that truly prioritizes sound quality.Lightweight driver - Heavyweight soundThe JT1 features a 50mm dynamic driver based on a PEK+PU+aluminum polymer diaphragm, carefully selected after evaluating numerous materials. The light weight of the driver allows it to move quickly and reproduce even the finest details, while the brass gasket ensures low distortion and extended frequency response.High-quality parts - for amazing musical performanceTo achieve great sound, you need to use high-quality components. To this end, the FiiO JT1 is equipped with powerful N52 magnets, a high-strength CCAW voice coil and a carefully engineered driver cone to achieve a natural and accurate sound. The wide soundstage and robust but well-controlled bass result in a truly detailed and immersive sound.Easy to use - for handy, great soundThanks to the compact and lightweight driver cone and voice coil, supported by high performance magnets, it's easy to achieve great sound with the JT1. It even works well with audio dongles, making the combination of the JT1 with them a kind of "golden combo".Detachable cable - for more versatilityThe detachable dual TRS cable features a "left-blue, right-red" design to easily identify how the cable should be connected to the headphones. Because it's a detachable cable, you can easily connect the FiiO JT1 to an unbalanced or balanced source, or opt for a cable with microphone and in-line controls to chat or play more easily. The affordable JT1 offers many options to suit your needs.*JT1 comes standard with a cable with inline controls and microphone.Adaptive headbandThe JT1 is equipped with a leather-wrapped, adaptive headband that automatically adjusts to fit your head perfectly for greater listening pleasure.A remarkable designThe JT1 consists of a stainless steel headband and lightweight ABS cavities housing the drivers, which are covered with a star-shaped, hollow aluminum cover. It's a lightweight, simple yet elegant design that is both practical and attractive.Scope of deliveryHeadphones*1,3.5 mm MIC cable*1Adapter 3.5 mm socket to 6.3 mm plug*1Storage bag*1Instruction manual*1SpecificationsHeadphone type: Closed dynamic over-ear headphonesFrequency response: 15Hz-30KHzImpedance: 32ΩSensitivity: 103dB/Vrms (@1kHz)Cable material: OFC oxygen-free copperCable length: About 150cmWeight: About 355g (without cable)Headphone connection: Two 3.5 mm jack plugsAudio plug: 3.5 mm  

On-ear Bluetooth ANC headphones Bluetooth 5.4 ANC and gaming modes 40 mm high-performance drivers 500 mAh battery with 58 hours of battery life Ergonomic design for comfortable wear Retro style Various colours – titanium, black or pink Bluetooth 5.4, robust battery life, extensive features Bluetooth specification updated to the new 5.4 generation, reducing power consumption and extending battery life. The sound signals are more stable, so the headphones work well even in environments with strong interference. They support higher quality audio for unlimited listening possibilities. A high-capacity battery lets you listen to music all day long The Anytime headphones have a 500 mAh battery, so you can listen to music all day long without worrying about the battery. *Reference values for battery life: Noise Cancelling off during music playback, approx. 58 hours; Noise Cancelling off during music playback, 35 hours; Noise Cancelling only on, approx. 50 hours; connected to a smartphone and in standby mode, approx. 330 hours. Supports ANC and game mode Anytime supports ANC (Active Noise Cancellation) technology. Simply press the ANC button once to activate ANC mode and escape the world of noise. Press the ANC button twice to activate game mode, which reduces audio latency to less than 60 ms and instantly gives you a gaming experience close to that of wired headphones. Retro style, comfortable design for all-day wear without pain The ergonomically shaped and retractable headband and flexible 3D hinges ensure that the headphones fit comfortably without pressing, even on different head sizes and shapes. The skin-friendly ear pads are soft as clouds. The distinctive ‘FIIO Arc’ design adds to the premium feel. Weighing only 155 g, the headphones are comfortable for all-day use. Retro Y2K style, easy to combine and ideal for photos With its retro Y2K style and metallic sheen, Anytime instantly takes you back to the turn of the millennium.Available in titanium gold, black and pink. Technical specifications: On-ear Bluetooth ANC headphones Model – Anytime Colours – Black, titanium, pink Weight – approx. 155 g Bluetooth version – 5.4 Bluetooth codecs – SBC/AAC Battery life 1 – Volume ANC off approx. 58 hours Battery life 2 – Volume ANC on approx. 35 hours Battery life 3 – ANC only, no music approx. 50 hours Standby time – approx. 330 hours when connected to a smartphone without music playback or ANC Charging time – approx. 2 hours

Retro mini headphones 40mm dynamic driver Imported diaphragm from Japan Special driver housing Retro style Lightweight feel 2 pairs of ear pads included Control via wired remote The SNOWSKY Wind Retro over-ear headphones combine vintage aesthetics with modern acoustic technology. Weighting just 50g and featuring a robust 40mm driver, these headphones deliver rich, impressively clear sound. The use of a Japanese PET composite diaphragm and high-quality CCAW voice coil ensures precise sound reproduction, while the strong N52 magnet boosts performance for powerful audio output. With three-button inline controls and an integrated microphone, they offer seamless compatibility for American-standard calls and media control. Available in sleek silver, classic black and charming pink, the SNOWSKY Wind headphones offer both performance and timeless style - perfect for audiophiles and retro design aficionados alike. The WIND is available in black, silver and pink, paired with black or orange foam ear pads that offer a variety of style options. WIND is designed to effortlessly complement your unique style. Weighting only about 50g, it almost feels like it's not even there when you wear it on your head! The retractable stainless steel headband and pivoting ear cups ensure a better fit and comfort, so you can give yourself over to enjoying and relaxing to the music.

Tri-Wood OasisLeading the way for our 4th gen X Drivers, the redesigned RS1x combines maple, hemp, and cocobolo wood into a vivacious and elegant headphone.•    Transducer Type: Dynamic•    Operating Principle: Open Air•    Frequency Response: 12 - 30,000 hz•    SPL 1mW: 99.8 dB•    Nominal Impedance: 38 ohms•    Driver Matched dB: .05 dBMaple, Hemp, Cocobolo.The Sound of WoodFor the first time, three different wood species are working together in a Grado headphone. The housing is made of a maple sleeve, hemp core, and cocobolo outer ring. We build with wood for its warm and embracing tonal abilities, but finding the right balance of three separate woods is no simple task. The reward though is an RS1x that opens Grado to a new level of sound.What We’re Known For.Signature SoundPulling everything we can from the new 50mm X Driver, our signature sound is brought to new heights when combined with maple, hemp, and cocobolo. Maple takes care of most of the work, hemp smooths out top and low ends, while cocobolo adds that extra punch. Together the sound the woods produce, when combined with our special processes, are full-bodied, dynamic, and truly defined.A New Harmony.X Series DriversThe RS1x is the first headphone to be built with the larger 50mm X Drivers. Specifically tuned for the tri-wood RS1x, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 50mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music.A Little Extra.New Cable & HeadbandsAlong with the speakers, the cables and headband have been redesigned for the RS1x. Housed in a more durable exterior, the now super annealed copper 8-conductor cable reveals even more of your music with improved purity. The new black leather headband features a white-stitched accent.With Love.Hand-Built in BrooklynOur first wooden headphones were built in the middle of the night back in 1994 by John Grado. Wood has been a staple on our workbench ever since. Each RS1x headphone is hand-built by our team in Brooklyn - these headphones go from workbench to workbench until they’re ready for your ears. We started building on a kitchen table in 1953, and every experience since then has led to the RS1x.Hand Build in BrooklynTri-Wood-DesignDurable 8 Conductor CableL CushionWhite-Stitched Leather HeadbandMetal Gimbals50mm Driver De-Stressed DriverDrivers Matched 0.05dB

A Tale of Two Timbers A nimble yet unwavering headphone, the redesigned RS2x explores new territory for the Reference Series by marrying maple with hemp wood. • Transducer Type: Dynamic • Operating Principle: Open Air • Frequency Response: 14 - 28,000 hz • SPL 1mW: 99.8 dB • Nominal Impedance: 38 ohms • Driver Matched dB: .05 dB The Sound of Wood. Maple, Meet Hemp A family favorite, the RS2x has been completely redesigned to bring out the full potential of its maple and hemp wood. The housing’s sleeve and ring are made from maple, while a hemp core keeps everything together. We build with wood for its warm and embracing tonal abilities, and the RS2x is an exceptional evolution to the RS2 line. What We’re Known For. Signature Sound Discovering new pieces in songs heard hundreds of times is what we’re here for. The driver and housing working in tandem react to sound vibrations and virtually eliminate transient distortions. With harmonic colors and a world renowned mid-range, the RS2x immediately draws you in. The sound the woods produce, when combined with our special processes, are full-bodied with a rich vocality. A New Harmony. X Series Drivers 4th gen X Drivers are here. Specifically tuned for the RS2x wood housing, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 44mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music. A Little Extra. New Cable & Headbands Along with the speakers, the cables and headband have been redesigned for the RS2x. Housed in a more durable exterior, the now super annealed copper 8-conductor cable reveals even more of your music with improved purity. The new black leather headband features a white-stitched accent. With Love. Hand-Built in Brooklyn Our first wooden headphones were built in the middle of the night back in 1994 by John Grado. Wood has been a staple on our workbench ever since. Each RS2x headphone is hand-built by our team in Brooklyn - these headphones go from workbench to workbench until they’re ready for your ears. We started building on a kitchen table in 1953, and every experience since then has led to the RS2x. Hand-Built in Brooklyn Maple / Hemp Wood Housing Bi-Wood Design Durable 8 Conductor Cable L Cushion White-Stitched Leather Headband De-Stressed Driver Drivers Matched .05dB

Black is the Color of Space Continue up the Prestige Series to bring a balance to your music with the speedy and consistent SR125x. • Transducer Type: Dynamic • Operating Principle: Open Air • Frequency Response: 20 - 20,000 hz • SPL 1mW: 99.8 dB • Nominal Impedance: 38 ohms • Driver Matched dB: .1 dB   Brothers & Sisters. Out of the Shadow The SR125x and SR225x have had a sibling rivalry for decades. Being the younger one, the SR125x utilizes its quick driver to keep up with any music it plays while also being more affordable. Just don’t tell their big sister. What We’re Known For. Signature Sound The clarity and range of Grado headphones can reveal new notes and details in songs heard hundreds of times. The driver and housing working in tandem react to sound vibrations and virtually eliminate transient distortions. With harmonic colors, full bodied vocals, excellent dynamics, and a world renowned mid-range, the SR125x produces a sound that’s pure Grado. A New Harmony. X Series Driver 4th Generation Grado drivers are here. Specifically tuned for the SR125x, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 44mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music. A Little Extra. New Cables & Headband Along with the speakers, the cables and headband have been redesigned for the SR125x. Now housed in a more durable exterior, the 8-conductor cable transfers more information and features a super annealed copper wire for improved purity of the audio signal. The new headband features more cushion for a comfier experience. With Love. Hand-Built in Brooklyn Each SR125x is hand-built by our team in Brooklyn. This headphone goes from workbench to workbench until it’s ready for your ears. We started building on a kitchen table in 1953, and every experience since then has led to the creation of the SR125x. Hand-Built in Brooklyn 8 Conductor Cable S Cushion De-Stressed Driver Drivers Matched .1dB In the Box: Headphones, Warranty, Grado story-sheet, 6.5mm Golden Adapter. Due to limitations from the global pandemic, some photos on this page may not yet show the new cables and headband that the headphones ship with.

For the Love of Fidelity Just before we get into metal and wood, the SR225x produces a fine tonal spread and liveliness that marks their place in the family. • Transducer Type: Dynamic • Operating Principle: Open Air • Frequency Response: 20 - 22,000 hz • SPL 1mW: 99.8 dB • Nominal Impedance: 38 ohms • Driver Matched dB: .05 dB Brothers & Sisters. A Unique Voice The SR225x and SR125x have had a sibling rivalry for decades. Being the mature one, the SR225x utilizes the new F cushion to open up the sound to more textured tones. The driver works in unison to produce a unique voicing and be just as fast as the SR125x. Just don’t tell their kid brother. What We’re Known For. Signature Sound The clarity and range of Grado headphones can reveal new notes and details in songs heard hundreds of times. The driver and housing working in tandem react to sound vibrations and virtually eliminate transient distortions. With warm harmonic colors, smooth top-end, excellent dynamics, and a world renowned mid-range, the SR225x produces a sound that’s pure Grado. A New Harmony. X Series Driver 4th Generation Grado drivers are here. Specifically tuned for the SR225x, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 44mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music. A Little Extra. New Cables & Headband Along with the speakers, the cables and headband have been redesigned for the SR225x. Now housed in a more durable exterior, the 8-conductor cable transfers more information and features a super annealed copper wire for improved purity of the audio signal. The new headband features more cushion for a comfier experience. With Love. Hand-Built in Brooklyn Each SR225x is hand-built by our team in Brooklyn. This headphone goes from workbench to workbench until it’s ready for your ears. We started building on a kitchen table in 1953, and every experience since then has led to the creation of the SR225x. Hand-Built in Brooklyn Durable 8 Conductor Cable F Cushion De-Stressed Driver Drivers Matched .05dB Included Accessories: Headphones, Warranty, Grado story-sheet, 6.5mm Golden Adapter. Due to limitations from the global pandemic, some photos on this page may not yet show the new cables and headband that the headphones ship with.

Unparalleled Sound One of our top-rated headphones, the SR325x delivers superior sound with 4th Gen Grado drivers. • Transducer Type: Dynamic • Operating Principle: Open Air • Frequency Response: 18 - 24,000 hz • SPL 1mW: 99.8 dB • Nominal Impedance: 38 ohms • Driver Matched dB: .05 dB   Precision Priority. The Sound of Metal With its metal housing, the SR325x brings a surgical precision to your music that you won’t find in the rest of the Prestige Series. Better imaging of the space between the instruments paints a clearer picture of your music in their soundstage. What We’re Known For. Signature Sound Some of the marvels of a Grado driver are the clarity and range, revealing new notes and details in songs heard hundreds of times. With superlative tonal balance, dynamics, imaging, and realism, the SR325x lays out an extremely detailed presentation. A New Harmony. X Series Driver 4th Generation Grado drivers are here. Specifically tuned for the SR325x, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 44mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music. A Little Extra. New Cables & Headband Along with the speakers, the cables and headband have been redesigned for the SR325x. Housed in a more durable exterior, the now super annealed copper 8-conductor cable reveals even more of your music with improved purity. The new leather headband features white stitching exclusive to the SR325x in the Prestige Series. With Love. Hand-Built in Brooklyn Each SR325x is hand-built by our team in Brooklyn. This headphone goes from workbench to workbench until it’s ready for your ears. We started building on a kitchen table in 1953, and every experience since then has led to the creation of the SR325x. Hand-Built in Brooklyn Brushed Aluminum Housing Durable 8 Conductor Cable F Cushion Leather Headband De-Stressed Driver Drivers Matched .05dB In the Box: Headphones, Warranty, Grado story-sheet, 6.5mm Golden Adapter. Due to limitations from the global pandemic, some photos on this page may not yet show the new cables and headband that the headphones ship with.

Easy Going The simplest way to experience Grado sound, the SR60x produces an impressive soundstage in an affordable headphone. • Transducer Type: Dynamic • Operating Principle: Open Air • Frequency Response: 20 - 20,000 hz • SPL 1mW: 99.8 dB • Nominal Impedance: 38 ohms • Driver Matched dB: .1 dB Sounds Affordable. Bang for the Buck - The entry-level headphone in the Brooklyn lineup, the SR60x produces the best audio quality at its price point and proves the Grado sound is never out of reach. What We’re Known For. Signature Sound - The clarity and range of Grado headphones can reveal new notes and details in songs heard hundreds of times. The driver and housing working in tandem react to sound vibrations and virtually eliminate transient distortions. With harmonic colors, full bodied vocals, and a world renowned mid-range, the SR60x produces easily obtainable Grado sound. A New Harmony. X Series Driver 4th Generation Grado drivers are here. Specifically tuned for the SR60x, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 44mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music. A Little Extra. New Cables & Headband Along with the speakers, the cables and headband have been redesigned for the SR60x. Now housed in a more durable exterior, the 4-conductor cable features a super annealed copper wire for improved purity of the audio signal. The new headband features more cushion for a comfier experience. With Love. Hand-Built in Brooklyn Each SR60x is hand-built by our team in Brooklyn. This headphone goes from workbench to workbench until it’s ready for your ears. We started building on a kitchen table in 1953, and every experience since then has led to the creation of the SR60x. -Hand-Built in Brooklyn -4 Conductor Cable # -S Cushion -Drivers Matched .1dB In the Box: Headphones, Warranty, Grado story-sheet, 6.5mm Golden Adapter. Due to limitations from the global pandemic, some photos on this page may not yet show the new cables and headband that the headphones ship with.

The New Classic The first Grado headphone, this is the legendary pair that started it all. • Transducer Type: Dynamic • Operating Principle: Open Air • Frequency Response: 20 - 20,000 hz • SPL 1mW: 99.8 dB • Nominal Impedance: 38 ohms • Driver Matched dB: .1 dB In the Beginning. Worthy Sound - The story of the SR80x holds a special place in not only our ears, but the ears of hundreds of thousands of listeners. The first pair was built in 1991 and we wouldn’t be here today without it. With its soundstage, world renowned mid-range, and speed, the SR80x is worthy of being the longest running Grado headphone. What We’re Known For. Signature Sound - Grado speakers can reveal new notes and details in songs heard hundreds of times. The driver and housing working in tandem react to sound vibrations and virtually eliminate transient distortions. The full bodied vocals and excellent dynamics compliment the musical characteristics that are brought to light through the extreme clarity and wide range of the SR80x. A New Harmony. X Series Driver 4th Generation Grado drivers are here. Specifically tuned for the SR80x, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 44mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music. A Little Extra. New Cables & Headband Along with the speakers, the cables and headband have been redesigned for the SR80x. Now housed in a more durable exterior, the 4-conductor cable features a super annealed copper wire for improved purity of the audio signal. The new headband features more cushion for a comfier experience. With Love. Hand-Built in Brooklyn Each SR80x is hand-built by our team in Brooklyn. This headphone goes from workbench to workbench until it’s ready for your ears. We started building on a kitchen table in 1953, and every experience since then has led to the creation of the SR80x. Hand-Built in Brooklyn Durable 4 Conductor Cable S Cushion De-Stressed Driver Drivers Matched .1dB In the Box: Headphones, Warranty, Grado story-sheet, 6.5mm Golden Adapter. Due to limitations from the global pandemic, some photos on this page may not yet show the new cables and headband that the headphones ship with.

High Fidelity The first of its kind, hemp finds yet another purpose in The Hemp Headphone. A brilliant, warm, and precise sound rolled into a Limited Edition Grado. • Housing: Hemp / Maple Wood • Transducer Type: Dynamic • Operating Principle: Open Air • Frequency Response: 13hz-28kHz • SPL 1mW: 98 • Normal Impedance: 38 ohms • Driver Matched db: .05 db To be blunt… Into the Unknown In our never-ending pursuit to experiment with all types of woods and materials, we had the opportunity to build with hemp. We weren't sure how these hemphones would turn out, but to everyone’s surprise it quickly became a favorite passed around Grado. To be blunt, this is one of the best sounding Limited Editions we've built. The Sound of Wood. Built from Hemp The highly compressed hemp creates a damping effect between their fibers. This produces a fuller sound, comprised of a noticeable low end and a top end that extends smoothly to its limits. The hemp may be doing the heavy lifting, but the hemphone is a joint effort. We built maple into the housing to help balance out the sound, and bring out the sonic properties that we’ve heard maple produce. # Specifically Tuned. Driver Focused The Grado drivers built into the hemp housings had to be specifically tuned for a material we’ve never worked with before. Being paired with maple gave us some foresight, but only through trial-and-error could we get the speakers to sound how we wanted, and bring out the potential of the hemp. Signature Sound. High Expectations The last seven decades has given us time to perfect our sound, letting the headphones reveal new notes and details in songs heard hundreds of times. The Hemp Headphone is a slow burn, constantly getting better with every listen. As we make sure with every headphone we build our Grado signature sound is ever-present, working in tandem with the hemp and maple. With Love. Hand-Built in Brooklyn Each Hemp Headphone is hand-built by our team in Brooklyn. Fine rolled for every genre of music, hemp and maple work together for the first time to bring a new level of vibrancy to our Limited Editions. We started building on a kitchen table in 1953, and every experience since then has led to the creation of The Hemp Headphone. Hand-Built in Brooklyn Hemp Housing Maple Housing 8 Conductor Cable F Cushion Leather Headband De-Stressed Driver Drivers Matched .05db

In Sanskrit, the word "deva" stands for something divine, heavenly, excellent. Indian mythology knows 33 devas - angelic counterparts of demons who act on a higher level than man. In the case of HIFIMAN, one is inclined to call the DEVA model a supporter of good sound.The DEVA Wired comes without the Bluemini Bluetooth module. Nevertheless, its focus is on mobile use with a player. The scope of delivery includes the corresponding cable with 6.35 mm jack adapter. In principle, DEVA can be operated symmetrically with an appropriate cable upgrade. For DEVA, the source does NOT have to be a sound superior device! In terms of price, it is below the HIFIMAN SUNDARA. In contrast, the DEVA is the more forgiving headphone, which does not let weaknesses in the recording stand out so clearly.For those who only value sound quality, have a good headphone output and are willing to forego mobility, the SUNDARA is the right choice. If you're looking for a really big, mobile cinema, you should consider the ANANDA-BT.Frequency response: 20 Hz to 20 kHzImpedance: 18 ΩSound pressure level: 93.5 dBWeight: approx. 360 gConnection: TRRS, 3.5 mm

HIFIMAN HE400SE - HIFIMAN does it again!The HIFIMAN HE400SE headphones in summary: If HIFIMAN has just surprised us with the HE400i version 2020 and its excellent price / performance ratio, they get a short time later to the next trick: The HIFIMAN HE400SE! Based on the HE400i V2020, but even more affordable and intended for mobile use.The highlights of the HIFIMAN HE400SE at a glance:    -The perfect mobile companion - Low impedance, high efficiency.    -Mag(net)ic attraction - "STEALTH MAGNET"- planar magnetic driver design    -New Cable - This offer is for the HE400se with the upgraded cable.    -Beveled ear pads - Noise isolation and temperature balancing    -Optimized headband - Nicer, lighter and more comfortable to wear    -Extremely convertible - Easily replace headphone cableSmall currents, big sound - The perfect headphones for on the goHIFIMAN HE400SE in profileIf the "brother in spirit", the HIFIMAN HE400 V2020 with its 35 Ω impedance is already a fairly uncomplicated contemporary, the HE400SE makes life even easier for the smartphone or computer with its 25 Ω impedance.With its efficiency of 91 decibels, it is ensured that even the rather coarse volume control of smartphones allows an accurate level gradation, without quiet or loud music passages requiring readjustment. Last but not least, the frequency range of 20 hertz to 20 kilohertz also shows that practical planning was done here, with a focus on entry-level and mid-range cell phones and music players.Sounds exciting? Just try it out and see for yourself.Planar-magnetic instead of dynamic - sound with appealJust like the HE400i V2020, the HIFIMAN HE400SE uses a planar-magnetic drive, albeit modified. What is still the same, however, is that instead of a classic diaphragm and voice coil immersed in a magnet, a thin foil crisscrossed with wires is used between a series of permanent magnets to generate sound.Planar-magnetic headphones have the advantage over their classically electrodynamically driven cousins in that the efficiency is very high due to the larger drive, and the impulse fidelity and resolution are also incredibly high due to the extremely light foil.All it takes is a little more space (i.e., a larger enclosure) than most common headphones. Angled ear pads - Comfortable and undisturbed listeningWhen you put on your headphones, that's the starting point for the "concert for one". Whether relaxed or rousing, the music plays just for you. To make sure it stays that way, the ear pads are beveled so that they rest perfectly on your ear and block out distracting noise from outside.The ear pads themselves are made of soft and skin-friendly velour, covered with a durable layer of artificial leather. This guarantees first-class sound coupled with maximum comfort.Headset optimized for mobile use - Tight but comfortableThe headband (i.e. the mechanical connection between the two earcups from ear to ear) relies on - you guessed it - the same concept as the 2020 model. HIFIMAN HE400SE. In other words, a combination of light weight and pleasantly even contact pressure."Contact pressure" is exactly the right keyword, though. After all, the HIFIMAN HE400SE sits a bit more firmly on the head than its 2020 counterpart. As a result, this version of the HE400 is once again recommended for use on the road, where things can get "down to business".Small but clever changes - even in the headphone cableThe HIFIMAN HE400i version 2020 is delivered with a rather solid cable with a noble fabric jacket, which makes it perfect for stationary use at the PC or home headphone amplifier.However, since the HE400SE is aimed more at mobile use, the headphone cable here was also in doubt and reconsidered. On the road, the cable must be flexible, fit into a pocket and also withstand bad weather (such as rain). A textile jacket seemed unsuitable and so HIFIMAN opted for a rubber coating for the cable.What has remained, however, is the adapter from 3.5 mm jack to 6.3 mm jack in the scope of delivery and the possibility to easily replace the headphone cable thanks to the 3.5 mm jack connections on the headphones.So, which type are you? Relaxed listening to music at home or music always with you? No matter what you choose, HIFIMAN has the right headphones for you.

For the name of the HIFIMAN Sundara, the company has once again used Sanskrit. There, the word stands for "grace" or "beauty" - terms that perfectly match the sound quality of the new headphone model.In his new magnetostat, company boss Dr. Fang Bian uses membranes that are 80% thinner than those of the successful HE-400 model. This way, he achieves a successful combination of richness of detail and velvety sound. The drivers operate in the range from 6 Hz up to 75,000 Hz. At the same time, it has been possible to increase the characteristic sound pressure level to 92 dB. With a stable impedance of 32 ohms, the Sundara can now be easily combined with the phone or music player of choice.A new headband design ensures good comfort. The ear cup itself and also its holder are now no longer made of plastic, but of aluminium. Nevertheless, the weight has been kept at only 372 g. The connection cables remain detachable and have 3.5 mm jack plugs on the earpiece side. The length of 1.5 m is chosen for mobile and desk use. An adapter for use with headphone outputs with a large jack is included.For the new ear pads, HIFIMAN has used the HE1000 V2 as a model and these are now fitted with polyester on the side facing the ear so that even long listening sessions can be enjoyed in a relaxed manner. The headband itself and the outer part of the ear pads are made of imitation leather. If older HIFIMAN models were simply too big, you will be pleased with the new headband design with its extended adjustment range. Frequency response: 6 Hz to 75 kHzImpedance: 32 ΩCharacteristic sound pressure: 92 dB/W/mWeight without cable: approx. 342 g Scope of delivery1 connection cable 1.5 m long, 2 x 3.5 mm mini jack to 3.5 mm jack1 x adapter from 3.5 mm to 6.35 mm stereo jack

High-quality headphones: The iBasso SR3 open-back headset is a flexible music companion with powerful sound, sensitivity to micro-detail in all music genres, fantastic build quality and comfort for extended listening sessions.Unrivalled features: With Tesla magnetic flux technology, biocellulose dome diaphragms and silicone suspension drivers, these audiophile headphones produce superb bass and powerful sound without overpowering the unique details of your music.Flexibility: These high-quality music headphones come with a 4.4 mm balanced headphone cable and a 4.4 mm to 6.3 mm cable adapter, so you can use different cables depending on your amplifier output for a premium listening experience. Ultimate comfort: these comfortable headphones feature soft ear pads and an adjustable leather headband, making them perfect for long listening sessions in the studio, on your computer, at home or on your next flight.Portable: These lightweight wired headphones weigh just 397g, but have an impedance rating of 150Ω and a sensitivity rating of 106dB at 1kHz, so you can enjoy an elevated listening experience wherever you go. The iBasso SR3 Wired Over Ear Headphones provide a high-quality audio experience for listening to music or a podcast or recording in the studio. These lightweight, portable headphones feature an open-back design for a natural, immersive soundstage that combines the strength of silicone suspension drivers with Tesla magnetic flux technology and biocellulose dome diaphragms. The SR3 headphones have a sensitivity rating of 106 dB at 1 kHz, an impedance rating of 150 Ω and a frequency response of 3 Hz to 40 kHz, so you can easily distinguish clear, precise sound. From Bach to techno, hear the full range of your music as if you were experiencing it live. These over-ear headphones come with a detachable 4.4 mm balanced headphone cable, a 4.4 mm to 6.3 mm cable adapter and a protective case, so you can enjoy a high-quality listening experience no matter where you are or what type of amplifier output is available. Our over-the-ear headphones feature a sleek and stylish design with soft ear pads and an adjustable leather headband, making them perfect for extended use. Each pair of detachable wired headphones comes with an extra set of ear pads. Experience your music like never before with the iBasso SR3 lightweight headphones. iBasso Audio products are made to be the best and are used by music lovers all over the world. Wherever people love music, iBasso is there.