HD Digital Audio Player Processor – 8-core Qualcomm Snapdragon 680 DAC - Dual Cirrus Logic CS43198 Amplification - 700 mW + 700 mW Output Power Screen - 4.7-inch high-resolution display Battery Life – Up to 12 hours of playback time Operating system – Android 13 Audio outputs – 4.4mm balanced + 3.5mm unbalanced Connectivity – Supports SPDIF and USB audio output USB-DAC computer sound card Bluetooth chip 5.0 4.7-inch IPS displayThe Fiio JM21 features a 4.7-inch IPS display with a resolution of 750*1334 pixels. Dual CS43198 DACsThe Fiio JM21 features two dedicated high-end DACs Cirrus Logic CS43198 and SGM8262 amplification. This effectively reduces crosstalk and enables higher quality and purer sound. Qualcomm Snapdragon 680 chipset Fiio JM21 is equipped with an 8-core Qualcomm Snapdragon 680 (6nm process). The new 680 processor used in the media player offers higher CPU performance with lower power consumption and heat generation. USB-DAC computer sound card Connect the device to a computer to use it as a USB-DAC and headphone amplifier. The sampling rate is up to 384 kHz/32-bit and is fully powered by the computer. Bluetooth chip Enjoy your favourite music via a wireless Bluetooth connection with an advanced Bluetooth 5.0 chip that supports SBC/AAC/aptX/aptX HD/LHDC/LDAC Bluetooth encoding. Powerful 700 mW + 700 mW outputsAn independent power system with low noise and high current output has been designed specifically for the CS43198 DAC's built-in amplifier. 3.5mm + 4.4mm headphone outputsThe Fiio JM21 has been upgraded to the more common balanced 4.4mm headphone jack, which provides more reliable and durable connections. It also includes a 3.5mm single-sided headphone jack so that it is compatible with the various headphones that you already own. In addition to supporting two headphone outputs, the JM21 also provides a maximum output power of up to 700mW, making it compatible with a wider range of headphones. Compact and lightweight design The low-power features of the 680 processor enable a thinner and lighter product, greatly improving portability.Combined with two low-power Cirrus Logic CS43198 DAC chips, the JM21 can achieve a stable battery life of over 9 hours (9.5 hours in balanced mode, 12.5 hours in single-ended mode) even with a 2400mAh battery. The JM21 features a two-tone frame design with an aluminium alloy middle frame and plastic back cover. This design makes the product appear sleeker. The aluminium alloy middle frame provides sturdy support and protection for the display. The plastic back cover was chosen for its light weight and also serves as the battery compartment. The back cover has a bevelled surface for a better grip. Entry-level price, premium configuration The 680 processor is considered a low-end configuration compared to FIIO's mid-to-high-end products (and even the broader music player industry).In this case, it is a low-end device equipped with a high-end processor. Two CS43198 DAC chips are standard configurations for mid-range portable audio products. Some users may compare them to portable USB dongles and assume that their sound quality is similar. However, the two are fundamentally different. One very important point is that the music players have a built-in battery, whose power source and flexibility is much higher than USB dongles, which draw their power from smartphones. This is one reason why the JM21 can deliver up to 700 mW of output power. Another point is the digital audio signal path, the player uses the main control chip and FPGA to reduce jitter before the DAC conversion, ensuring a direct signal path with a high correlation to the quality of the source. In contrast, portable USB dongles rely on the USB transmission from the phone via a cable for decoding and amplification, introducing additional factors that can affect the audio signal. Various connections and functions The 3.5mm and 4.4mm headphone outputs also serve as line out (LO) outputs, allowing you to connect external amplifiers or powered speakers. In terms of digital outputs, the JM21 supports coaxial and USB digital audio output, providing a digital audio source for connection to higher-quality decoders. For the coaxial output, you should use a 3.5mm to RCA adapter, with a maximum sample rate of 384kHz or DSD128. The USB output supports up to 768kHz or DSD512 in exclusive USB audio mode in the FiiO Music App. Internally, the JM21 is equipped with two customised femtosecond oscillators that ensure sufficient quality for digital transport. These features make the JM21 a versatile device that can serve multiple purposes and meet different user needs. Worry-free purchase, effortless use Meeting the needs of users has always been FIIO's primary mission. To achieve this, the JM21 not only comes with excellent product configuration and portability, but also with well-thought-out accessories to provide users with hassle-free use. For example, the JM21 comes with a pre-installed PET screen protector and a transparent protective case for comprehensive protection, so you can use the product immediately after unpacking it without worry. *Please note: the FiiO JM21 does not support fast charging. It is recommended to use a USB charger with max. 5V-2A for charging.

HD digital audio player Processor – 8-core Qualcomm Snapdragon 680 DAC – Dual Cirrus Logic CS43198 Amplification – 700 mW + 700 mW output power Screen – 4.7-inch high-resolution display Battery life – up to 12 hours of playback Operating system - Android 13 Audio outputs – 4.4 mm balanced + 3.5 mm unbalanced Connectivity - Supports SPDIF and USB audio output USB DAC computer sound card Bluetooth chip 5.0 4.7-inch IPS display The Fiio JM21 features a 4.7-inch IPS display with a resolution of 750*1334 pixels. Dual CS43198 DACs The Fiio JM21 has two dedicated high-end DACs, Cirrus Logic CS43198 and SGM8262 amplification. This effectively reduces crosstalk and enables higher quality and purer sound. Qualcomm Snapdragon 680 chipset The Fiio JM21 is equipped with an 8-core Qualcomm Snapdragon 680 (6nm process). The new 680 processor used in the media player offers higher CPU performance with lower power consumption and less heat generation. USB DAC computer sound card Connect the device to a computer to use it as a USB DAC and headphone amplifier. The sampling rate is up to 384 kHz/32-bit and is fully powered by the computer. Bluetooth chip Enjoy your favorite music via a wireless Bluetooth connection with an advanced Bluetooth 5.0 chip that supports SBC/AAC/aptX/aptX HD/LHDC/LDAC Bluetooth encoding. Powerful 700 mW + 700 mW outputs An independent low-noise, high-current power supply system has been specially designed for the CS43198 DAC's built-in amplifier. 3.5 mm + 4.4 mm headphone outputs The Fiio JM21 has been upgraded to the more common balanced 4.4 mm headphone jack, which provides more reliable and durable connections. It also features a 3.5 mm headphone jack with a single-sided plug, making it compatible with the various headphones you already own. Not only does the JM21 support two headphone outputs, but it also offers a maximum output power of up to 700 mW, making it compatible with a wide range of headphones. Compact and lightweight design The power-saving features of the 680 processor allow for a thinner and lighter product, which greatly improves portability. Combined with two power-efficient Cirrus Logic CS43198 DAC chips, the JM21 achieves a stable battery life of over 9 hours (9.5 hours in balanced mode, 12.5 hours in single-ended mode) even with a 3100mAh battery. The JM21 features a two-tone frame design with an aluminum alloy middle frame and a plastic back cover. This design makes the product appear sleeker. The aluminum alloy middle frame provides sturdy support and protection for the display. The plastic back cover was chosen for its light weight and also serves as a battery compartment. The rear cover has a beveled surface for a better grip. Entry-level price, premium configuration The 680 processor is considered a lower-end configuration compared to FIIO's mid- to high-end products (and even the broader music player industry). In this case, it is a low-end device equipped with a high-end processor. Two CS43198 DAC chips are standard configurations for mid-range portable audio products. Some users may compare them to portable USB dongles and assume that their sound quality is similar. However, the two are fundamentally different. One very important point is that music players have a built-in battery, whose energy source and flexibility is much higher than USB dongles, which draw their power from smartphones. This is one reason why the JM21 can deliver up to 700 mW of output power. Another point is the digital audio signal path. The player uses the main control chip and FPGA for jitter reduction prior to DAC conversion, ensuring a direct signal path with high correlation to the quality of the source. In contrast, portable USB dongles rely on USB transmission from the phone via a cable for decoding and amplification, which introduces additional factors that can affect the audio signal. Various connections and functions The 3.5 mm and 4.4 mm headphone outputs also serve as line-out (LO) outputs to which you can connect external amplifiers or active speakers. As for digital outputs, the JM21 supports a coaxial and a digital USB audio output, providing a digital audio source for connection to higher-quality decoders. For the coaxial output, you should use a 3.5 mm to RCA adapter, with a maximum sampling rate of 384 kHz or DSD128. The USB output supports up to 768 kHz or DSD512 in the exclusive USB audio mode in the FiiO Music app. Internally, the JM21 is equipped with two custom-made femtosecond oscillators that ensure sufficient quality for digital transport. These features make the JM21 a versatile device that can serve multiple purposes and meet different user needs. Worry-free purchase, effortless use Meeting user needs has always been FIIO's primary mission. To achieve this, the JM21 not only comes with excellent product configuration and portability, but also with thoughtful accessories to provide users with a hassle-free experience. For example, the JM21 comes with a pre-installed PET screen protector and a transparent protective case for comprehensive protection, so you can use the product worry-free right out of the box. *Note: The FiiO JM21 does not support fast charging. It is recommended to use a USB charger with a maximum of 5V-2A for charging.

The highlights of the FiiO M11 Plus at a glance:Committed to first-class sound - 2x ESS ES9068AS integrated8-core Snapdragon 660 processor on board - Powerful and energy-efficient at the same timeTHX AAA amplification - Fully balanced and equipped with plenty of powerAndroid 10 as operating system - Flexible to use, intuitive and beautifulTrue communication talent - 2-way Bluetooth, 2.4/5 GHz WiFi and moreEnergy-efficient and smooth operation - Thanks to Snapdragon 660 octa-core processorThe FiiO M11 Plus is powered by Qualcomm's blazingly fast Snapdragon 660. The structure of the processor follows the Big.LITTLE concept - four powerful cores are used for computationally intensive tasks and four energy-saving cores for less demanding processes. On the one hand, this ensures that the M11 Plus always responds smoothly to operating inputs, but on the other hand, it also plays music throughout the day.Besides the processor itself, the rest of the equipment is also impressive. Namely, 4 GB of RAM, 64 GB of internal memory (expandable up to 2 TB via MicroSD) and an Adreno 512 graphics processor that cuts a fine figure in videos and games.THX Certified - With the innovative THX AAA circuitry on boardThe masterminds behind THX® (they're the ones who made the movie "Star Wars", among other things) came up with a clever amplifier circuit called THX AAA technology. This innovative technology and the rigorous testing procedure associated with it are now also used in the FiiO M11 Plus. And it's one of the first High Res players in the world to do so.This seal guarantees that every THX-certified module delivers a clearly audible, significantly better sound quality with the same power supply as other modules.This THX AAA-78 amplifier is used in both balanced and unbalanced mode and delivers "full power". The only difference: In balanced mode, two amplifier modules are active in parallel, in unbalanced mode only one.In addition, only the finest components work in this module. For one thing, an eight-stage amplifier circuit, a 4-fold independent power supply, a six-layer PCB layout and high-precision resistors with a maximum tolerance of 0.5%. The result is incredibly low distortion and excellent channel separation for the best sound.Shields up! - Outside interference doesn't stand a chanceAs nice as it is to talk and exchange with each other: With electrical circuits, this is definitely undesirable. That's why FiiO has not only completely redesigned the main circuit board of the M11 Plus and consistently separated the digital and analogue circuits, but also shielded them from external influences using appropriate metal sheets.This measure once again underlines the consistency, respect and love that FiiO Musik pays to the best possible sound.Android 10 as the operating system - flexible, intuitive and beautifulThe built-in hardware plays a major role in the complete music experience - but not alone. It forms the basis for it, but in the end it is the software that controls the hardware that decides what comes out in the end. And because FiiO leaves nothing to chance with the M11 Plus, they have chosen what is probably the most flexible and versatile operating system available: Android!And as good as Android already sounds in its "factory state", it still has a lot of potential for further improvements. A challenge that FiiO is happy to take on and has optimised the operating system down to the smallest detail. This makes listening to music twice as much fun.Plenty of connectivity - something for everyoneBluetooth 5.0 - Both as a transmitter and a receiverBluetooth is still the king among wireless protocols when it comes to a fast and uncomplicated connection between transmitter and receiver. With Bluetooth 5.0, the FiiO M11 Plus not only adds a high range and interference resistance, but also an enormous variety of standards. In addition to SBC and AAC, aptX, aptX-HD and LDAC are also available in the transmitter direction.And the best thing about it: The M11 Plus not only sends music via Bluetooth, but also receives it! This means that the player also functions as a high-quality Bluetooth receiver via SBC, AAC and LDAC. The player then outputs the music received in this way as usual via its headphone connections, via USB or the coaxial digital output and ensures the best sound.2.4 GHz and 5 GHz WLAN - music from NAS and the InternetEven though the FiiO M11 Plus has a huge storage capacity, sometimes you need a little more. And thanks to WLAN with 2.4 GHz and 5 GHz, the music can come directly from the NAS at home or from the streaming service of your choice (for example, Tidal, Deezer, Spotify, Qobuz). The whole world of music is thus open to you.Oh, and if you want to listen to music from one of your Apple devices directly via the FiiO M11 Plus: AirPlay is also on board, which is a great alternative to the (under Apple) limited Bluetooth protocol AAC).Wired is also possible - for example, via 2-way USB Type-C.The USB Type-C connection is not a one-way street either. The FiiO M11 Plus can receive music digitally and convert it via its high-quality D/A converter in the best quality (maximum 32 bit/384 kHz and DSD128) and pass it on, but it can also work as a USB transport. As a USB transport, the music stored on the player is simply passed on in digital form to a DAC connected behind it, which then decodes your music. Of course, this also works via the coaxial digital output.So obvious, so versatile - the headphone connectionsLast but not least; probably the most frequently used connection type: the headphone. With all the variety the FiiO M11 Plus has to offer, it would be a surprise if they had "skimped" here. Well, there are not just one or two different connection options; no, there are all three.You can connect your headphones either classically via the 3.5 millimetre jack connection, fully balanced via the 2.5 millimetre jack connection or simply via the balanced 4.4 millimetre jack connection. And if all that isn't enough: the 3.5 mm jack output can also function as a coaxial digital output if desired. No matter how you connect the FiiO M11 Plus, one thing is guaranteed: It always sounds great.The best possible usability - Via the 5.5" display and via FiiO LinkAll the technology and the incredible variety of functions are made easy and clear with the 5.5"/13.97 centimetre touch display. With a resolution of 1440 x 720 pixels and a maximum of 16.7 million displayable colours, this high-quality IPS display plays to all its strengths. So you can not only listen to your music in excellent quality, but also see it.And if you don't feel like operating the player via its integrated touch display (for example, because you have it in your pocket or backpack), you will appreciate the "FiiO Link" app. Simply connect your smartphone (only Android is supported at the moment) to the M11 Plus via Bluetooth and control it elegantly from your smartphone. It couldn't be simpler.Not only does it look good, it also feels good - the elegant housingThe FiiO M11 Plus is an experience in every respect. Sound-wise, optically and also haptically.The modern design completely dispenses with curves and relies on a straightforward, sharply cut profile that conveys at first glance: "We mean business!".This impression is underlined by the almost frameless touch display and the carbon fibre behind coated glass on the back.And here, too, there is another innovation compared to its predecessors: the rotary wheel for volume control has disappeared or been replaced by two physical buttons embedded in the housing. This saves space and makes the FiiO M11 Plus even easier to carry in your pocket. But there's more: in addition to the buttons on the housing, the volume can also be conveniently controlled with a swipe of the touch display, via Bluetooth and via FiiO Link. It's all in your hands!Power needs power - and the M11 Plus delivers!The M11 Plus is packed to the brim with smart technology and powerful electronics. Of course, all these innovations and high performers need power to guarantee the best sound.To ensure that you still have good music in your ears all day long, FiiO has given the M11 Plus a gigantic battery with 6,000 mAh capacity. This results in a maximum of 11.5 hours of runtime (depending on the volume setting, the headphones used and the selected file format). And if the battery does run out at some point, it is fully charged and ready for use again within about three hours thanks to QuickCharge 2.0/3.0/4.0 or USB Power Delivery 2.0 (applies to QC4.0).Also good to know: Via Quick Charge 2.0 and/or MediaTek Pump Express, the player is fully charged again within 2.5 hours and ready for the next adventure. And if you don't need it, that's no problem either. The battery provides up to 55 days of standby!The matching accessories are also includedTo ensure that you can enjoy your player for as long as possible and that it also survives minor accidents or falls undamaged, the FiiO M11 Plus also comes with the matching accessories.A leatherette case is included in the scope of delivery, as well as a factory-applied tempered glass screen protector. And for an optimal connection, FiiO also includes the matching USB 3.0 cable to quickly transfer data to and from the player and to ensure an optimal charging process.

FiiO M15s FiiO M15S is an upgrade to the classic M15 with enhanced DAC and SoC chipsets and upgraded Android as well. The M15S packs a high-end ES9038Pro DAC chip that provides exceptional high-resolution audio signal decoding supporting high-resolution PCM and DSD audio signals. FiiO has trusted Qualcomm’s advanced Snapdragon 660SoC chip that provides silky smooth UI with support for the latest Android OS and applications. It’s fully prepared for high-resolution audio streaming on Apple Music and is also Roon Ready. FiiO M15S marks an upgrade over a classic model redesigned from the ground up with new and advanced features.# High-End ES9038Pro DAC Chipset Snapdragon’s Latest 660SoC Chipset Big 5.5” Display Screen Latest Android 10 OS 4GB RAM For Smooth Multi-Tasking 64GB Internal Storage Qualcomm’s Latest QCC5124 Bluetooth Chipset Two-Way High-Res Bluetooth Connectivity Two-Way USB 3.0 Connectivity Integrated RGB Indicator in Volume Wheel Balanced Line-Out Support High-Power Output(Up to 1.2W per channel) Apple Music, Roon Ready Dual Power Supply Mode High-Power Headphone Output Mode Desktop Mode Support Disable Battery Charging While Using USB DAC Support Supports FiiO DK3S Cooling Stand High-End Sabre DAC ChipsetAt its very core, FiiO M15S adopts the performance of the flagship ES9038 Pro DAC chip from ESS Sabre Technologies. It’s an exceptional 32-Bit 8-channel DAC that provides tremendously clean and precise performance while decoding high-resolution audio signals. It supports all leading music formats and supports high-resolution 32-Bit PCM and native DSD audio signals. With the M15S in your pocket, you are fully prepared to enjoy crisp high-resolution audio anytime anywhere. Advanced Snapdragon SoC ChipsetFiiO M15s has received an upgrade in the SoC department as well. We have got Qualcomm’s advanced Snapdragon 660SoC chip. It is paired with 4 GB of RAM and 64 GB of ROM. It provides a clean and fast user interface allowing you to use multiple media applications easily. Open Android 10 OSFiiO M15S comes loaded with Android 10 OS as stock. It has Google Play store pre-installed on the system which allows the user to easily install different media applications. It supports Hi-Res streaming on Apple Music. The M15S is also Roon Ready for your setups. High-Resolution Two-Way Bluetooth ConnectivityFiiO M15S features high-res two-way Bluetooth connectivity, supporting all-leading Bluetooth transmission protocols including LDAC, AptX HD, AptX, etc. You can connect it to your smartphone, use the Smartphone as a music source and use the M15S as a Bluetooth DAC/AMP. Multiple Headphone Output OptionsFiiO M15S features multiple headphone output ports including 3.5mm single-ended, 2.5mm balanced, and 4.4mm balanced ports. It also supports the Balanced line-out function through the balanced 4.4mm output. High-Power Headphone Output ModeFiiO M15S is a powerful portable digital audio player. It packs up to 1.2W of clean output power that is adequate enough to drive even demanding headphones with ease. It also features a high-power headphone output mode, which is suitable for power-hungry demanding over-ear headphones. Integrated RGB Indicator LightThe volume wheel at the top of the M15 has a built-in RGB indicator light. It glows in different colors based on the active playback bitrate.  

High-Res lossless music player New octa-core Snapdragon 680 processor with 6nm structure width Android 13 4x CS43198 DACs Fully balanced 2-stage amplification Dual Type-C ports 950mW high output power 4.7-inch HD screen 3.5mm + 4.4mm headphone/LO dual output A new benchmark, a new paradigm The M21 redefines the entry-level class with its flagship pedigree, its inner and outer values will bring you much joy. Its compact display and class-leading performance are a big step forward and it will be a benchmark for a whole new generation. Patented desktop mode Expert in battery protection Desktop mode is available for the first time on an entry-level FiiO player. When desktop mode is activated, the M21 is fully powered by an external power supply. The built-in battery is neither charged nor discharged, so you can safely use the player on your desk without draining the battery. Patent number: ZL202321946664.8 Portable/desktop dual power supply mode A leap in performance In portable mode, the player is powered by a standard power supply. When using the external power supply in “Super High Gain” mode, the player automatically switches to a high voltage supply with a peak output voltage of 21 Vpp (300 ohms) and a massive output power of 950 mW (32 ohms). This delivers desktop-level performance, making the player more compatible with a wider range of earphones or headphones and providing a truly exceptional listening experience. Real quality inside and out The all-aluminum alloy body with a frosted AG glass back offers a fine texture and is comfortable to hold. The screen has an oleophobic coating that significantly reduces fingerprints and smudges and enables smoother touch operation. Digital and analog shielding A heavenly sound The digital and headphone amplifier sections are housed in separate partitions, each with independent shielding covers for isolation. This not only reduces signal crosstalk, but also enables efficient heat dissipation and delivers a purer sound. Flagship-level performance There are separate power supply paths for the digital and analog circuits, effectively reducing crosstalk between the two. The result is more precise digital processing, a purer analog output and improved drive performance. The analog circuit is further divided into multiple independent power supplies for components such as the DAC and headphone amplifier. This clean and robust power supply improves the dynamic range and results in a better reproduction of details in the audio range - for a more refined and natural sound. High-end hi-fi components for better sound The M21's audio circuitry uses high-precision thin-film resistors and temperature-stable capacitors for refined and stable sound - especially for greater consistency between the left and right channels and across all frequency ranges. In addition, fine circuits such as the DAC and headphone amplifier are equipped with over 10 low-impedance, high-capacitance tantalum capacitors. These provide ample power reserves and a robust power supply for a more powerful, dynamic sound. Global audio optimization 5th generation FPGA + two custom femtosecond crystal oscillators FIIO has developed a crystal oscillator specifically for the M21, carefully selected to meet femtosecond standards to ensure consistency and stability in output. With a high-precision, low-jitter unified clock source, it accurately matches PCM and DSD audio at different sampling rates, ensuring precise reproduction of digital audio signals. Versatile connectivity 3.5mm and 4.4mm line outputs The independent line amplifier circuits allow connection to powered speakers or external amplifiers. Digital output SPDIF output: The low-jitter coaxial output is comparable to that of Pro Equipment, with jitter reduced by 70% and high performance when connected to a high-end external audio DAC. Coaxial output circuit architecture USB audio output: Connect an external audio DAC and instantly turn it into a streaming jukebox. 15 hours of battery life Explore the world of music The M21's 4000 mAh high-voltage battery offers an extremely long battery life of up to 15 hours, effortlessly providing the power for extended listening sessions on the way to work or while traveling, so you can fully immerse yourself in the world of music. It also supports 20W PD fast charging, so you can charge quickly even during short breaks. Only the POWER IN interface supports PD fast charging. Back to the Walkman era at the touch of a button The customized cassette-style protective case* combined with an exclusive retro user interface and customized vintage sound effects takes you on a nostalgic journey back to the Walkman era... Remove the protective cover to seamlessly return to the original system so you can use the device as you wish. *The cassette-style protective cover must be purchased separately. **When using the cassette-style protective case, touchscreen operation is disabled; only the buttons are supported. What`s in the box: M21*1 Hardened screen protector (factory pre-installed*1) Silicone protective cover*1 Warranty card *1 Quick start guide *1 USB data cable * 1 User manual *1

Flagship high-resolution player Snapdragon 778G octa-core CPU 8 GB RAM 128 GB storage Two high-speed TF/ SD card slots Two top-of-the-line DACs ES9039MPRO Standard coaxial + fiber optic output interface 5000 mW + 5000 mW output power Sixth-generation FPGA + RIVER femtosecond quartz oscillator Lossless Bluetooth QCC5181 XMOS XU316 (16 cores) 9200 mAh high-temperature safety battery Multifunctional air-cooled heat dissipation base The FiiO M27 Guided by the “Neutral Grandeur” acoustic philosophy, the M27 evolves from the “portable desktop” of the M17 with next-generation specifications next-generation performance and fluidity, redefining the benchmark for portable Hi-Fi players. Elite computing power: QCS6490 (Snapdragon 778G architecture) While most Hi-Fi players still rely on the Snapdragon665, the M27 is a pioneer with the QCS6490 (with Snapdragon 778G architecture). Combined with Android 13 and 8 GB RAM + 256 GB storage, it delivers a quantum leap in speed and responsiveness. Unsurpassed Bluetooth: Qualcomm QCC5181 The M27 supports the aptX Lossless Bluetooth codec, making it the first hi-fi player to enable lossless Bluetooth reception. Flagship DAC: Dual ESS ES9039SPRO With two ESS Sabre Pro ES9039SPRO DACs featuring 32-bit Hyperstream IV architecture, the M27 achieves an extremely wide dynamic range, virtually no distortion, and lifelike audio details with impressive realism. State-of-the-art DAPS technology: Brand new high-capacity FPGA + two RIVER femtosecond crystal oscillators The M27 is the first device to feature FiiO's sixth-generation DAPS (Digital Audio Purification System) and utilizes a high-performance FPGA in combination with RIVER femtosecond crystal oscillators. This advanced architecture creates a unified clock source with extremely low jitter while providing enhanced signal processing capabilities that ensure perfect audio reproduction throughout the entire signal chain. First use of titanium alloy as in smartphones + glass fiber back panel technology A titanium alloy case is available as an option. Combined with a high-strength glass fiber back panel, which is also used in smartphones, the M27 combines a high-quality texture and feel, truly embodying a flagship product. Unsurpassed performance: 5000 mW + 5000 mW balanced output power Equipped with 5-step hardware gain control, the balanced output in ultra-high gain mode delivers an impressive 5000 mW + 5000 mW of power, effortlessly driving most over-ear headphones on the market. Comprehensive I/O ecosystem In addition to 3.5 mm, 4.4 mm, and 6.35 mm headphone outputs, the M27 is also equipped with a standard coaxial input/output and a standard optical output, making it compatible with a wide range of devices. This makes it ideal not only for combining with various front-end or back-end devices to build a hi-fi system, but also as a reference device for sound optimization. Expandable masterpiece: Two microSD card slots Two high-speed microSD card slots (supporting up to 2 TB + 2 TB) ensure instant access to extensive music libraries and bring every classic in your collection back to life. Unmatched battery performance The M27 is equipped with FiiO's patented desktop mode, allowing it to function as a desktop device while extending battery life. In addition, the powerful 9200 mAh high-voltage battery can be replaced by the user. Thanks to the unlimited battery life, you no longer have to wait long for charging. Reference-grade audio architecture At its core, the M27 features a sophisticated six-stage desktop-class audio architecture. This system combines two ES9039 DACs with two ES9312 power regulators in a quadruple independent power supply configuration, achieving an exceptionally low noise level. Precision is further enhanced by two NJU72315 digital volume control chips and OPA2211 high-performance operational amplifiers, which work together to deliver stable, reference-quality audio output.

Portable smart high-resolution audio playerQualcomm Snapdragon 680Android 13, 8 GB + 128 GB large memory and RAMXMOS XU316 chip10-band PEQ, supports AUTO EQFully differential 24-bit R2R resistor arraysMulti-stage audio circuit with TI operational amplifiers1100 mW + 1100 mW powerful output power5.5-inch 1080p HD display15.5 hours of battery lifeTwo sound profiles: “Flat” and “Warm”Qualcomm Snapdragon 680 + Android 13, 8 GB + 128 GB large memory and RAMMore generous memory and RAM combination compared to other devices in its class, enabling smooth media streaming and effortless multitasking.XMOS XU316 chipHelps synchronize audio and video when used as a USB DAC, ensuring a consistent audiovisual experience in any situation.From desktop to portable device – the evolution of R2RFiiOs has integrated the proprietary R2R resistor array, originally developed for desktop devices, into a portable player for the first time. Designed by experienced acoustic engineers and perfected through feedback from the global audiophile community, it offers the ultimate listening experience.The distinctive, rich analog warmth traditionally associated with R2R, combined with balanced high-fidelity performanceFully differential 24-bit R2R resistor array DAC.Four channels, a total of 192 precision thin-film resistors with 0.1% accuracy and low temperature drift.Extensive memory, consistently smooth performanceThe Qualcomm Snapdragon 680 and the M33 R2R's extensive 8 GB RAM + 128 GB ROM memory are unmatched in its class. Experience effortless streaming and seamless multitasking. It offers extra power and storage to handle future updates with ease and ensure a stable and long-lasting experience for years to come.Perfect audiovisual synchronization with USB DAC, supported by a dedicated “core”Are you frustrated by high latency when using a USB DAC for songs or videos? A dedicated XMOS XU316 chip provides ultra-low latency and robust performance, ensuring flawless audio synchronization that remains consistent across all your devices.Large 5.5-inch HD display, more than just sizeExperience total immersion with a high-resolution display designed for high-fidelity entertainment. New cassette, spectrum, and VU meter visualizations let you dive deeper into the music and give each track a classic retro flair.1080*2160 resolution, third-generation Corning Gorilla Glass, oleophobic coating, pre-installed tempered glass screen protector.Ultra-slim comfort, impressive at first touchLike the minimalist design of the FIIO M21, the sleek, refined lines of the M33 R2R create an elegant aesthetic. Thanks to clever engineering, FiiO has found the perfect balance between size and ergonomics. It's not just about the impressive numbers on the M33 R2R's spec sheet, but also the seamless, natural feel in your hand.18:9 golden ratioMinimalist designClear and high-quality double-beveled edgesErgonomic comfort - matte AG glass back Silky smooth feel Compared to the M23 aluminum alloy editionFlagship-worthy proprietary DAPS (Digital Audio Purification System)High-performance FPGA + two custom-made femtosecond quartz oscillatorsEquipped with the same ultra-precise, extremely low-jitter unified clock source as the flagship M27, the M33 R2R offers a huge leap in efficiency and fidelity in digital audio processing compared to the M23. With FiiO's proprietary DAPS (Digital Audio Purification System), this advanced architecture creates a unified clock source with extremely low jitter while providing enhanced signal processing capabilities that ensure perfect audio reproduction throughout the entire signal chain.Supports AUTO EQ Your ideal sound, just a tap awayDo you find the manual adjustment of the lossless 10-band PEQ too complex?AUTO EQ automatically adjusts to the frequency curve of your headphones and instantly delivers your ideal sound profile with lossless precision. In addition to sound presets such as pop, jazz, and classical, the app also supports detailed adjustment per band, allowing you to customize your sound.Carefully designed audio circuitry, powered by TIThe preamplifier stage uses fully differential operational amplifiers from TI for I/V conversion and signal processing, delivering a natural and room-filling sound. The output stage features four INA1620 amplifier chips in parallel configuration. These chips provide up to 1100 mW + 1100 mW of output power to effortlessly drive any headphones. Finally, precise electronic volume control ensures that you experience explosive dynamics without losing a single detail.High-end components for audiophiles 2x TI Burr-Brown OPA1637 fully differential audio operational amplifiersExplosive dynamics and masterful control over every note.4× Ti Burr-Brown INA1620Minimizes crosstalk and ensures that there is no interference between channels, even when overdriven or clipped.8x Rubycon film capacitorsEnsures natural, transparent mids and smooth, fatigue-free highs.Precision volume control NJW1195AOffers high precision and extremely low noise for accurate volume control.Precise power supply systemThere are independent power supplies for digital and analog stages. The analog stage uses three separate circuits for the R2R arrangement, the preamplifier stage, and the amplifier stage, ensuring a more refined and natural sound. The amplifier power supply supports two voltage levels. Activating “Over-Ear Headphone Mode” triggers the high-voltage rail, increasing the output power to 1100 mW + 1100 mW, allowing both sensitive IEMs and demanding over-ear headphones to be driven effortlessly. 65A high-current MOSFETs for efficient power distribution with minimal losses, massive capacitors for energy storage, and a 15W power management system with ample power reserves.Multi-stage, compartmentalized shielding for pure soundTo ensure the cleanest possible sound, the digital audio processing, R2R array, amplifier, and power modules are housed in separate areas with independent shielding. This significantly reduces signal interference and crosstalk, resulting in a “blacker,” extremely quiet background with a clearer soundstage that brings out every musical detail.15.5 hours of extremely long battery life, no more worrying about running out of powerWith a high-quality, high-capacity 4400 mAh battery, both single-ended and balanced playback times have been significantly improved over the M23. Thanks to fast charging at low temperatures, the M33 R2R can be charged quickly without overheating. Thanks to the long-lasting battery and fast charging function, your music never has to be interrupted. 30W fast charging at low temperatures Fully charged in 1.5 hours 15.5 hours of single-ended playback time 13.5 hours of balanced playback time.*Data from FIIO Labs. Actual performance may vary depending on usage and environmental factors.Two Type-C ports, double the versatility Patented desktop modeBypasses the battery during use to enable high power output without discharge. This reduces charging/discharging cycles, significantly extending battery life. Patent number: ZL202321946664.8Over-ear headphone modeEquipped with four gain levels: low, medium, high, and over-ear headphones.Connect a fast charger to either of the two Type-C ports to activate over-ear headphone mode and get even more amplification and output power. With up to 1100 mW + 1100 mW per channel, it easily drives demanding, high-impedance over-ear headphones.Versatility and broad compatibilityAnalog outputs3.5 mm and 4.4 mm headphone outputs:Supports single-ended and balanced headphones.3.5 mm and 4.4 mm line outputs: With dedicated line amplifier circuitry, you can connect external speakers and amplifiers to truly experience the magic of R2R sound.Digital outputsSPDIF output: Features low-jitter coaxial signal processing circuitry that rivals dedicated digital transport systems, with a coaxial output jitter of only 71.5 ps. Combined with high-quality external DACs, you'll achieve truly remarkable performance.USB audio output: Connect external DACs or combine the device with the DK1PRO to instantly transform it into a powerful streaming transport.High-resolution two-way Bluetooth: Bluetooth transmission supports SBC/aptX/aptX HD/LHDC/LDAC; Bluetooth reception supports SBC/LDAC.Compatible with RETRO BOX, take your own music with you wherever you goIt's the perfect complement to the cassette-style RETRO BOX Bluetooth speaker, opening up another way to enjoy music. Thanks to the RETRO BOX's versatile user interface, it can serve as both a decorative tabletop device and a portable music source.*RETRO BOX is not included and must be purchased separately.Absolute versatility, broad compatibilityFive operating modesChoose between Android, Pure Music, AirPlay, USB DAC, and Bluetooth reception modes.Customizable multifunction buttonsAccess frequently used functions with a single click.Leather protective case includedThe retro gold version comes with a khaki-colored leather case, while the dark blue and black versions come with a color-coordinated leather case.

Portable DAP Operating system: Proprietary SoC: Ingenic X2000 Round touchscreen display Supports microSD cards up to 2 TB DAC: 2 × Cirrus Logic CS43131 Output power: 280 mW at 32 ohms via 4.4 mm balanced output Support for USB DAC mode (external sound card) USB audio function for connection to external DAC/amplifier SPDIF via 3.5 mm headphone output Battery life: up to 12 hours Bluetooth 5.4 Codec support: SBC and LDAC Headphone outputs: 3.5 mm and 4.4 mm A compact and slim DAP that can be attached to the back of a smartphone The SnowSky Disc is a digital audio player (DAP) that not only offers smooth navigation through FiiO's proprietary Linux-based operating system, but also convenience for users looking for a device to listen to music on smartphones without a headphone jack. When you attach the Disc DAP to the back of your smartphone, you have two options: you can either listen to music stored on the microSD card inserted into the digital audio player, or connect the DAP to your phone via a USB cable to play tracks from streaming services such as Spotify, YouTube Music, Apple Music, or Tidal. AirPlay, Roon* Your complete streaming solution, all in one DISC. *Roon Ready functionality is currently beeing worked on and will be supported via a later firmware update.Output power sufficient for most portable headphonesWith 280 mW of output power from the balanced 4.4 mm headphone output, the Disc is capable of driving most portable headphones, including in-ear monitors (IEMs), earbuds, and on-ear models. Internal battery You don't have to worry about your smartphone running out of power when you connect it via USB to listen to streaming apps. There are also two gain levels for better volume control per step, which is especially helpful for headphones with high sensitivity and low impedance. Large storage capacity for music The Disc supports microSD cards up to 2TB, providing ample storage capacity for music files such as MP3 or FLAC. In addition, according to FiiO, this DAP can scan 5,000 tracks in just 30 seconds. Firmware updates via Wi-Fi Thanks to the Disc's Wi-Fi connectivity, firmware updates can be installed via OTA. This eliminates the need to download the file to a PC and copy it to the microSD card, as is the case with the Echo Mini. Buttons and controls Navigating through menus and music albums on the SnowSky Disc is smooth thanks to the use of gesture shortcuts in combination with multifunctional physical buttons. Different themes for displaying information With the SnowSky Disc, users can change the way information is displayed on the screen by choosing from different visual themes.

Portable high-resolution lossless music playerAluminum-magnesium alloy2.39-inch IPS HD frameless color display3.5 SE + 4.4 balanced outputsDual DACsUSB DAC functionalityBluetooth supportMicro SD card slotEQ presets/custom EQSupports various music formatsDSD supportSupports inline controlE-book functionality14-hour battery lifeHi-Res Audio certifiedTimeless echoesNew brillianceThe ECHO series has been upgraded—from lightweight plastic to a sophisticated metal finish.A tribute to the legendary cassette recorder with a dynamic retro user interface that brings the spinning tape back to life.Experience your favorite music anew through a metallic lens, where every note carries the weight of history.Metal constructionEnhanced feelThe ECHO's body is made from 6000 series aluminum-magnesium alloy and has been precision CNC-milled. The result is an exquisite tactile feel with a solid, high-quality weight.The classic cassette look of the ECHO MINI is back, bringing back the charm and soul of another era.HD cover art/lyrics displayIn vivid colorsThe ECHO features a range of specially designed retro-dynamic user interfaces—including VU meters, spinning cassettes, and audio visualizers—with full support for album covers and lyrics.The 2.39-inch high-resolution color display brings covers and lyrics to life in stunning detail, providing a truly comfortable viewing experience.* Supports LRC lyrics and embedded JPG covers.Two 3.5 mm and 4.4 mm outputsTruly versatileEquipped with a 3.5 mm single-ended and a 4.4 mm balanced headphone jack, the ECHO is compatible with almost any cable or headphones – from entry-level IEMs to high-end boutique headphones.Two CS43198 DACsUnleash superior soundWith two brand-new CS43198 DACs and a dedicated power supply, the ECHO delivers symmetrical output power of up to 260 mW, making it better equipped to drive everything from IEMs to full-size headphones.Supports UAC functionalityInstantly transform your music player into a USB DACThanks to UAC support, the ECHO can also be used as an external USB DAC. Connect it to your smartphone or PC to take advantage of its flagship chips and high-end circuitry and instantly give these devices hi-fi sound. Just plug it in and get started—no drivers required.*In UAC mode, you can disable charging to conserve your smartphone's battery.Comprehensive format supportOne device for allWith support for DSD, WAV, FLAC, APE, MP3, M4A, and OGG, the ECHO can handle virtually any audio format and quality level with ease.*DSD support up to DSD256; PCM support up to 24-bit/192 kHz.Seamless Bluetooth connectivityListen without restrictionsEasily connect to your favorite Bluetooth headphones or speakers.Enjoy your high-resolution library in complete freedom—without cables.*Some devices may not be supported due to protocol compatibility limitations.14 hours of battery lifeThanks to its large 1100 mAh battery, the ECHO offers over 14 hours of continuous playback, making it the ideal companion for long journeys.Supports micro SD cardsFor significantly expanded storage spaceThe ECHO has 8 GB of internal memory and supports micro SD cards up to 256 GB. Easily store thousands of lossless tracks and enjoy your high-quality library on the go.More than a playerAn e-book in your pocketThe ECHO has a built-in TXT reader, so it can also be used as a portable e-reader.Enjoy music and literature anytime, anywhere.Supports inline controlFor everyday convenienceWith support for inline control, you can easily play, pause, skip tracks, and adjust the volume. Support for the CTIA standard ensures seamless compatibility with many devices.Precise EQ settingsPersonalized, immersive listening experienceECHO supports a variety of EQ modes with multiple built-in music style presets that can be customized to your liking.It also supports high-precision custom EQ settings that allow for detailed adjustment of frequency band amplification, so you can create a unique sound that's perfectly tailored to you.Hi-Res Audio certifiedGuaranteed sound qualityThe ECHO features an independent audio crystal oscillator to improve the accuracy of the audio signal.Hi-Res Audio certification is your guarantee of a premium audio experience.Eye-catching colorsStyle in your handFrom elegant, subtle tones to vibrant, eye-catching shades, there's a color to suit your taste perfectly.Official protective casesCarefully tailored for youAvailable in official leather and TPU finishes, these cases have been precisely modeled to ensure a perfect fit for the ECHO.Enjoy a refined tactile feel with quality you can trust.

HiFi Bluetooth MP3 Player Retro design that mimics the classic cassette players, with a dynamic retro user interface for a nostalgic experience. 3.5 mm single-ended and 4.4 mm balanced outputs for a wide range of headphones. Two CS43131 DACs for pristine and detailed sound. Bluetooth 5.3 for wireless connection to Bluetooth headphones and speakers. Up to 15 hours of playback with a large 1100 mAh battery. 8 GB built-in memory with support for microSD cards up to 256 GB. Supports DSD, WAV, FLAC, APE, MP3, M4A, OGG formats Only supports Bluetooth SBC transmission. Note: Apple Bluetooth headphones are not supported.USB sound card FiiO SnowSky Echo Mini HiFi Bluetooth MP3 Player The FiiO SnowSky Echo Mini is a high-resolution portable music player that combines retro design elements with modern high-fidelity audio features. Visually inspired by classic cassette players, the Echo Mini offers two DACs, Bluetooth support and extensive file format compatibility. This makes it the perfect music companion for anyone who appreciates nostalgia without compromising on sound quality. Echoes of the past When time passes, every memory echoes in our hearts like a timeless melody. The Echo mini is not only the return of Fiio's pure music player, but is also designed to remind us of classic devices that everyone remembers fondly. With a design that pays homage to two cassette players and a dynamic retro user interface that replicates the spinning of cassettes, we can relive the familiar sounds of the past. Mini player The Echo mini is incredibly light, retro buttons for operation bring back nostalgic feelings, available in black, cyan and pink - simple yet elegant, colorful and versatile. Retro UI A minimal bezel IPS color screen that houses various dynamic retro UIs, an interweaving of old and new that brings back the feeling of portable cassette players The charm of wired headphones Equipped with a 3.5mm connector for wired headphones and a 4.4mm output to satisfy audiophile connoisseurs. A robust core With two high-end hi-fi DACs and an independent power supply, the Echo mini can deliver up to 250 milliwatts of power despite its diminutive size, allowing it to be paired with a wide range of headphones. Full format support Supports DSD, WAV, FLAC, APE, MP3, MA 4 and OGG formats. Full format support means seamless playback on demand thanks to wider compatibility. Listen with Bluetooth Bluetooth version 5.3, connect to Bluetooth headphones and speakers for comfortable listening. 15 hours of battery life The large 1100mAh battery provides more than 15 hours of music enjoyment. Whether commuting or traveling, the Echo Mini is a loyal music companion that fits in the palm of your hand. Supports micro SD cards The player has 8GB of built-in storage and can be expanded by up to 256GB with a micro SD card. Relive the classics you've accumulated over the years in your personal music collection.More than just a Player The Echo Mini can be also used as a USB sound card/DAC Whether connected to a phone or a computer, it`s plug-and-play with no additional drivers required.